DD JUMPGUARD PRO
There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet.
Jumpguard Pro DIY Aquarium Cover
Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.
D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.
The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.
Included in the kit
The Jumpguard Pro Aquarium Cover is a kit of parts which allows the aquarist to create a custom frame for their specific aquarium. The rigid corners and extruded aluminium section create a very solid frame which sits neatly inside glass of the aquarium glass, resting on the top lip.
TC7575 (75cm x 75cm)
90cm x 90cm (36″ x 36″) Black mesh
5 x 75cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline,total length 3.5m
2 x Black finger pull
2 x Reverse corner
1 x 75cm brace bar
4 x brace clips
TC12075 (120cm x 75cm)
140cm x 90cm (55″ x 36″) Black mesh
3 x 75cm + 2 x 120cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 4.4m
2 x Black finger pull
2 x Reverse corner
2 x 75cm brace bar
6 x brace clips
2 x T corners
DD JumpGuard Pro | 75cm x 75cm, 120cm x 75cm |
---|
Quick Comparison
Settings | DD JUMPGUARD PRO remove | SEACHEM HYDROTOTE 20 L remove | SEACHEM GLASS FEEDER 40 mm Diameter remove | SEACHEM GLASS BEETLE DIFFUSER 30mm remove | SEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc remove | SEACHEM GLASS IN LINE DIFFUSER 17 mm remove | ||
---|---|---|---|---|---|---|---|---|
Name | DD JUMPGUARD PRO remove | SEACHEM HYDROTOTE 20 L remove | SEACHEM GLASS FEEDER 40 mm Diameter remove | SEACHEM GLASS BEETLE DIFFUSER 30mm remove | SEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc remove | SEACHEM GLASS IN LINE DIFFUSER 17 mm remove | ||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
SKU | 000116311304 | 000116031592 | 000116031547 | 000116031561 | 000116031622 | |||
Rating | ||||||||
Price | ||||||||
Stock | Out of stock | In stock | In stock | In stock | In stock | In stock | ||
Availability | Out of stock | In stock | In stock | In stock | In stock | In stock | ||
Add to cart | ||||||||
Description | There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. |
| ||||||
Content |
Jumpguard Pro DIY Aquarium Cover
Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.
D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.
The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.
Included in the kit
The Jumpguard Pro Aquarium Cover is a kit of parts which allows the aquarist to create a custom frame for their specific aquarium. The rigid corners and extruded aluminium section create a very solid frame which sits neatly inside glass of the aquarium glass, resting on the top lip. | Overview
Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store.
The HydroTote™ is a collapsible jug that holds up to 20 L (5 US gallons) or 10 L (2.5 US gallons). It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it folds and compresses to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
20 L HydroTote | Overview
The Glass Feeder is a simple and elegant tool to store, display, and dispense fish food such as Seachem NutriDiets™. This feeder is excellent for every aquarium type and can dispense a wide variety of dry flake and pellet foods. Makes an excellent accessory for aquascapes and reef aquaria where presentation is key!
DirectionsLoadingTurn the feeder so that the opening is facing up. Press down on the spring loaded rod; the glass sphere will raise allowing you to pour your food of choice into the Feeder.FeedingSimply press down on the spring loaded rod. The glass sphere will lower allowing food to pour out. Experiment with how much much pressure you apply to the rod in order to increase or decrease the amount of food being released. |
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria.
Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
| Overview
The Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Bubble Counting Diffuser has a 17 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.
|
The 17 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 16 mm ID/22 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
Rinse glassware with warm water. Cut filter hose (Compatible with 12 mm ID / 16 mm OD filter hose) to appropriate length so that inline diffuser will hang vertically next to aquarium glass when filter outflow is placed on aquarium. Attach aquarium hose, ensuring that diffuser disc faces “up” toward outflow. Attach suction cups and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the CO2 in line of the diffuser.
Install check valve (not included) inline with 6 mm (1/4") tubing (CO2 in)
To attach tubing and hose to glassware, wet the inside of the tubing or hose with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing or hose, do not pull tubing off of glassware. Instead, cut tubing or hose carefully along the attachment length to release the glassware.
Mount your inline diffuser using the suction cup(s). It should be positioned so that it sits vertically on the side or back of the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Once securely mounted, turn on filter. Ensure that water passes through diffuser and into aquarium without leaks or bubbles. Turn on CO2. Observe bubble count (bubble counter not included) and adjust CO2 to desired flow rate. Seachem Bubble Counter available for easy monitoring of CO2 flow.
| ||
Weight | ||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||
Additional information |
|