Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM CORAL PLUGS

  • Secure base for freshly cut corals and polyps
  • Contain calcium and magnesium sources for rapid growth
  • Unique shape aids overgrowth of encrusting coral or polyps

Overview

Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug.

Sizes: 12 Plugs

 

Directions

Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.

SKU: 000116015028 Category:

Quick Comparison

SettingsSEACHEM CORAL PLUGS removeADA Spring Washer S (for pipes under Φ13mm) removeSEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc removeADA SUPERGE removeSEACHEM GLASS FEEDER 40 mm Diameter removeSEACHEM GLASS U TUBE 10 mm remove
NameSEACHEM CORAL PLUGS removeADA Spring Washer S (for pipes under Φ13mm) removeSEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc removeADA SUPERGE removeSEACHEM GLASS FEEDER 40 mm Diameter removeSEACHEM GLASS U TUBE 10 mm remove
Image
SKU00011601502845379340292730001160315614537934029112000116031592000116031509
Rating
Price
Stock

In stock

In stock

In stock

Out of stock

In stock

In stock

AvailabilityIn stockIn stockIn stockOut of stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Secure base for freshly cut corals and polyps
  • Contain calcium and magnesium sources for rapid growth
  • Unique shape aids overgrowth of encrusting coral or polyps
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
  • Monitor rate of CO2 injection
  • For aquariums up to 75 L (20 US gallons)
  • Low profile design excellent for minimizing the visibility of the diffuser
  • Simple and easy to use
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.
  • An elegant solution for storing food and feeding
  • For pelleted and flake foods such as Seachem NutriDiet™ flakes
  • Suitable for all aquarium types
  • Easy to use fill and use
  • Ideal for aquarium airline or CO2 tubing
  • 10 mm size is suitable for rimless aquariums
  • Great for use with CO2 injection systems or bubblers
Content

Overview

Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug. Sizes: 12 Plugs
 

Directions

Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.

Overview

The Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Bubble Counting Diffuser has a 17 mm disc. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.

Directions

Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser. To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Install check valve (not included) inline with tubing outside of the aquarium Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.

Overview

The Glass Feeder is a simple and elegant tool to store, display, and dispense fish food such as Seachem NutriDiets™. This feeder is excellent for every aquarium type and can dispense a wide variety of dry flake and pellet foods. Makes an excellent accessory for aquascapes and reef aquaria where presentation is key!

Directions

Loading
Turn the feeder so that the opening is facing up. Press down on the spring loaded rod; the glass sphere will raise allowing you to pour your food of choice into the Feeder.
Feeding
Simply press down on the spring loaded rod. The glass sphere will lower allowing food to pour out. Experiment with how much much pressure you apply to the rod in order to increase or decrease the amount of food being released.

Overview

The 10 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing. Compatible with 6 mm (1/4") - Standard Airline Tubing.

Directions

Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing). To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Install check valve, if desired, (not included) inline with tubing outside of the aquarium Mount your U Tube over the rim of your aquarium in the desired location
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare