Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM GLASS PH CHECKER 25mm

  • Monitors pH solution in aquarium
  • Easy-to-read color changing indicator solution included
  • Recommended for planted aquaria with CO2injection systems

Overview

The pH checker is a glass pH monitor that comes with pH sensitive indicator solution. When submerged in water, this indicator solution changes color according to changes in the pH of the aquarium as a result of CO2 gas. The pH checker makes monitoring CO2 concentrations and pH level in planted aquaria easy.

Suction cup included.

 

Directions

pH Checker works with any size aquarium. Holding the funnel side of pH Checker upward fill the small bulb with 20 drops of indicator solution. Slowly turn the funnel side down avoiding any spillage of the solution. Insert pH Checker into aquarium funnel side down trapping air in the funnel. Attach the pH Checker in aquarium at the furthest point from any diffuser.

The color of the indicator solution will change yellow to green to blue according to the pH of the water. A more yellow color indicates lower pH / more CO2. A more blue color indicates higher pH / less CO2.

SKU: 000116031523 Category:

Quick Comparison

SettingsSEACHEM GLASS PH CHECKER 25mm removeSEACHEM GLASS U TUBE 10 mm removeCOVE PVC water pipe - Orange 20mm removeADA PS-UTT 2 2m Clear (PRESSURE RESISTANCE TUBE) removeSEACHEM GLASS BEETLE DIFFUSER 30mm removeCOVE PVC water pipe - Red 25mm remove
NameSEACHEM GLASS PH CHECKER 25mm removeSEACHEM GLASS U TUBE 10 mm removeCOVE PVC water pipe - Orange 20mm removeADA PS-UTT 2 2m Clear (PRESSURE RESISTANCE TUBE) removeSEACHEM GLASS BEETLE DIFFUSER 30mm removeCOVE PVC water pipe - Red 25mm remove
ImagePlaceholderPlaceholder
SKU00011603152300011603150966665567453793410129000011603154766665564
Rating
Price
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Monitors pH solution in aquarium
  • Easy-to-read color changing indicator solution included
  • Recommended for planted aquaria with CO2injection systems
  • Ideal for aquarium airline or CO2 tubing
  • 10 mm size is suitable for rimless aquariums
  • Great for use with CO2 injection systems or bubblers
It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.
  • For aquariums 75-190 L (20-50 US gallons)
  • Preferred pollen-style diffuser for large aquaria or high-growth aquaria
  • Large surface area of diffuser disc ideal for high volumes of CO2 gas
Content

Overview

The pH checker is a glass pH monitor that comes with pH sensitive indicator solution. When submerged in water, this indicator solution changes color according to changes in the pH of the aquarium as a result of CO2 gas. The pH checker makes monitoring CO2 concentrations and pH level in planted aquaria easy. Suction cup included.
 

Directions

pH Checker works with any size aquarium. Holding the funnel side of pH Checker upward fill the small bulb with 20 drops of indicator solution. Slowly turn the funnel side down avoiding any spillage of the solution. Insert pH Checker into aquarium funnel side down trapping air in the funnel. Attach the pH Checker in aquarium at the furthest point from any diffuser. The color of the indicator solution will change yellow to green to blue according to the pH of the water. A more yellow color indicates lower pH / more CO2. A more blue color indicates higher pH / less CO2.

Overview

The 10 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing. Compatible with 6 mm (1/4") - Standard Airline Tubing.

Directions

Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing). To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Install check valve, if desired, (not included) inline with tubing outside of the aquarium Mount your U Tube over the rim of your aquarium in the desired location
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria. Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
 

Directions

Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser. To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Install check valve (not included) inline with tubing outside of the aquarium Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare