Each Jumpguard Multi-cutout Set provides you with 3 different cutout options to allow you to modify the frame around any light brackets, cables or pipework etc.
Each kit contains
1 pair of 15mm offset corners
1 pair of 40mm offset corners
1 x 40mm x 120mm lighting bracket or rigid cut-out
Note:
Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity.
1 x 40mm x 120mm lighting bracket or rigid cut-out
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
For aquariums 75-190 L (20-50 US gallons)
Preferred pollen-style diffuser for large aquaria or high-growth aquaria
Large surface area of diffuser disc ideal for high volumes of CO2 gas
The collapsible water jug for transporting saltwater, RO water, and DI water
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
Content
Each Jumpguard Multi-cutout Set provides you with 3 different cutout options to allow you to modify the frame around any light brackets, cables or pipework etc.
Each kit contains
1 pair of 15mm offset corners
1 pair of 40mm offset corners
1 x 40mm x 120mm lighting bracket or rigid cut-out
Note:
Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity.
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria.
Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
Overview
Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store.
The HydroTote™ is a collapsible jug that holds up to 20 L (5 US gallons) or 10 L (2.5 US gallons). It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it folds and compresses to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium.
It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.
Moss Cotton is a special thread to tie and fix moss on driftwood. In a quite dark green color similar to that of Willow moss and it will naturally biodegrade after Willow moss has taken root to the driftwood or rock.
Read moreLogin to view price
