Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SICCE PUMP CLEAN (CITRIC ACID gr.900)

Multipurpose product for removing limestone residue on pumps and else. Sicce Pump Clean is Completely Natural which makes it ideal for removing limescale residues from pumps, filters and all other aquarium, pond, hydroponic products that are used in close contact with water or fully submerged.

Key Features

  • 100% Safe, environmentally friendly, biodegradable, green, organic powder product designed for multiple applications.
  • Reduces maintenance and cleaning practices of the pump by 50%.
  • Regular use preserves the product and slows down wear.
  • Also safe for general housekeeping applications:
  • DESCALER FOR WASHING MACHINE AND DISHWASHER
  • RINSE AID FOR DISHWASHER
  • SOFTENER FOR WASHING MACHINE
  • NATURAL DISSOLVANT APPLIANCE
  • EXHAUST MAINTENANCE
  • COOKWARE CLEANING RUST
  • STAIN REMOVAL
  • GARMENT ANTI-FELTING
  • Contents: NET WT 32 OZ (900g)
SKU: 8011469973943 Categories: ,

Quick Comparison

SettingsSICCE PUMP CLEAN (CITRIC ACID gr.900) removeCOVE PVC water pipe - Red 25mm removeSEACHEM GLASS IN LINE DIFFUSER 17 mm removeADA Spring Washer M (for pipes above Φ17mm) removeSEACHEM CORAL PLUGS removeADA SUPERGE remove
NameSICCE PUMP CLEAN (CITRIC ACID gr.900) removeCOVE PVC water pipe - Red 25mm removeSEACHEM GLASS IN LINE DIFFUSER 17 mm removeADA Spring Washer M (for pipes above Φ17mm) removeSEACHEM CORAL PLUGS removeADA SUPERGE remove
ImagePlaceholder
SKU80114699739436666556400011603162245379340292660001160150284537934029112
Rating
Price
Stock

Out of stock

In stock

In stock

In stock

In stock

Out of stock

AvailabilityOut of stockIn stockIn stockIn stockIn stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionMultipurpose product for removing limestone residue on pumps and else. Sicce Pump Clean is Completely Natural which makes it ideal for removing limescale residues from pumps, filters and all other aquarium, pond, hydroponic products that are used in close contact with water or fully submerged.
  • Minimizes the visibility of CO2 equipment in the aquarium
  • Ensures maximum dissolution of CO2 in aquarium water
  • Allows for more consistent dosing of CO2
  • Compatible with 16 mm ID/22 mm OD hoses
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
  • Secure base for freshly cut corals and polyps
  • Contain calcium and magnesium sources for rapid growth
  • Unique shape aids overgrowth of encrusting coral or polyps
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.
Content

Key Features

  • 100% Safe, environmentally friendly, biodegradable, green, organic powder product designed for multiple applications.
  • Reduces maintenance and cleaning practices of the pump by 50%.
  • Regular use preserves the product and slows down wear.
  • Also safe for general housekeeping applications:
  • DESCALER FOR WASHING MACHINE AND DISHWASHER
  • RINSE AID FOR DISHWASHER
  • SOFTENER FOR WASHING MACHINE
  • NATURAL DISSOLVANT APPLIANCE
  • EXHAUST MAINTENANCE
  • COOKWARE CLEANING RUST
  • STAIN REMOVAL
  • GARMENT ANTI-FELTING
  • Contents: NET WT 32 OZ (900g)
The 17 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2 Compatible with 16 mm ID/22 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
 
Rinse glassware with warm water. Cut filter hose (Compatible with 12 mm ID / 16 mm OD filter hose) to appropriate length so that inline diffuser will hang vertically next to aquarium glass when filter outflow is placed on aquarium. Attach aquarium hose, ensuring that diffuser disc faces “up” toward outflow. Attach suction cups and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the CO2 in line of the diffuser. Install check valve (not included) inline with 6 mm (1/4") tubing (CO2 in)   To attach tubing and hose to glassware, wet the inside of the tubing or hose with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing or hose, do not pull tubing off of glassware. Instead, cut tubing or hose carefully along the attachment length to release the glassware. Mount your inline diffuser using the suction cup(s). It should be positioned so that it sits vertically on the side or back of the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Once securely mounted, turn on filter. Ensure that water passes through diffuser and into aquarium without leaks or bubbles. Turn on CO2. Observe bubble count (bubble counter not included) and adjust CO2 to desired flow rate. Seachem Bubble Counter available for easy monitoring of CO2 flow.

Overview

Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug. Sizes: 12 Plugs
 

Directions

Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare