Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM GLASS U TUBE 20 mm

  • Glass U Tube joint for silicone tubing
  • 20 mm size suitable for rimless aquariums and most standard aquarium rims
  • Great for use with CO2 injection systems or bubblers

Overview

The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.

Compatible with 6 mm (1/4″) – Standard Airline Tubing.

 

Directions

Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4″) – Standard Airline Tubing).

To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.

Install check valve, if desired, (not included) inline with tubing outside of the aquarium

Mount your U Tube over the rim of your aquarium in the desired location

SKU: 000116031516 Category:

Quick Comparison

SettingsSEACHEM GLASS U TUBE 20 mm removeSEACHEM GLASS FEEDER 40 mm Diameter removeCOVE PVC water pipe - Red 20mm removeSEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc removeSEACHEM CORAL PLUGS removeSEACHEM HYDROTOTE 20 L remove
NameSEACHEM GLASS U TUBE 20 mm removeSEACHEM GLASS FEEDER 40 mm Diameter removeCOVE PVC water pipe - Red 20mm removeSEACHEM GLASS BUBBLE COUNTING DIFFUSER - POLLEN 17 mm Disc removeSEACHEM CORAL PLUGS removeSEACHEM HYDROTOTE 20 L remove
ImagePlaceholder
SKU00011603151600011603159266665563000116031561000116015028000116311304
Rating
Price
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Glass U Tube joint for silicone tubing
  • 20 mm size suitable for rimless aquariums and most standard aquarium rims
  • Great for use with CO2 injection systems or bubblers
  • An elegant solution for storing food and feeding
  • For pelleted and flake foods such as Seachem NutriDiet™ flakes
  • Suitable for all aquarium types
  • Easy to use fill and use
  • Monitor rate of CO2 injection
  • For aquariums up to 75 L (20 US gallons)
  • Low profile design excellent for minimizing the visibility of the diffuser
  • Simple and easy to use
  • Secure base for freshly cut corals and polyps
  • Contain calcium and magnesium sources for rapid growth
  • Unique shape aids overgrowth of encrusting coral or polyps
  • The collapsible water jug for transporting saltwater, RO water, and DI water
Content

Overview

The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing. Compatible with 6 mm (1/4") - Standard Airline Tubing.
 

Directions

Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing). To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Install check valve, if desired, (not included) inline with tubing outside of the aquarium Mount your U Tube over the rim of your aquarium in the desired location

Overview

The Glass Feeder is a simple and elegant tool to store, display, and dispense fish food such as Seachem NutriDiets™. This feeder is excellent for every aquarium type and can dispense a wide variety of dry flake and pellet foods. Makes an excellent accessory for aquascapes and reef aquaria where presentation is key!

Directions

Loading
Turn the feeder so that the opening is facing up. Press down on the spring loaded rod; the glass sphere will raise allowing you to pour your food of choice into the Feeder.
Feeding
Simply press down on the spring loaded rod. The glass sphere will lower allowing food to pour out. Experiment with how much much pressure you apply to the rod in order to increase or decrease the amount of food being released.

Overview

The Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Bubble Counting Diffuser has a 17 mm disc. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.

Directions

Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser. To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Install check valve (not included) inline with tubing outside of the aquarium Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.

Overview

Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug. Sizes: 12 Plugs
 

Directions

Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.

Overview

Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store. The HydroTote™ is a collapsible jug that holds up to 20 L (5 US gallons) or 10 L (2.5 US gallons). It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it folds and compresses to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
 

20 L HydroTote

  • Capacity: 20 L (5 US Gallons)
  • Material: Low-density polyethylene
  • Length: ~28 cm (11 inches)
  • Width: ~28 cm (11 inches)
  • Height (with handle): ~33 cm (13 inches)
  • Weight (filled): ~18 kg (42 lbs)
  • Faucet Spout: Yes
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare