Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

KAMOER ATO ONE 2 SE

ATO One 2 is an intelligent water replenishment device, is an upgraded version of ATO One.
ATO One 2 SE is the standard version with submersible pump, it only needs to install the sensor and submersible pump, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 SE has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 SE will have indicator light and buzzer alarm.
SKU: 6970719750098 SE Categories: ,

Quick Comparison

SettingsKAMOER ATO ONE 2 SE removeCOVE PVC water pipe - Red 50mm removeADA SUPERGE removeSEACHEM GLASS BEETLE DIFFUSER 30mm removeSEACHEM GLASS BUBBLE COUNTING SPIRAL DIFFUSER - POLLEN 23 mm Disc removeSEACHEM GLASS U TUBE 20 mm remove
NameKAMOER ATO ONE 2 SE removeCOVE PVC water pipe - Red 50mm removeADA SUPERGE removeSEACHEM GLASS BEETLE DIFFUSER 30mm removeSEACHEM GLASS BUBBLE COUNTING SPIRAL DIFFUSER - POLLEN 23 mm Disc removeSEACHEM GLASS U TUBE 20 mm remove
ImagePlaceholder
SKU6970719750098 SE666655664537934029112000116031547000116031578000116031516
Rating
Price
Stock

Out of stock

In stock

Out of stock

In stock

In stock

In stock

AvailabilityOut of stockIn stockOut of stockIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
ATO One 2 is an intelligent water replenishment device, is an upgraded version of ATO One.
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.
  • For aquariums 75-190 L (20-50 US gallons)
  • Preferred pollen-style diffuser for large aquaria or high-growth aquaria
  • Large surface area of diffuser disc ideal for high volumes of CO2 gas
  • For aquariums up to 75 L-190 L (20-50 US gallons)
  • Large surface area of diffuser disc ideal for high volumes of CO2 gas
  • Built in bubble counter makes the use of a separate bubble counter unnecessary
  • Simple and easy to use
  • Glass U Tube joint for silicone tubing
  • 20 mm size suitable for rimless aquariums and most standard aquarium rims
  • Great for use with CO2 injection systems or bubblers
Content
ATO One 2 SE is the standard version with submersible pump, it only needs to install the sensor and submersible pump, which can be used after power on without setting. The sensor is fixed by magnet, which is convenient for installation and adjustment. Equipped with optical level sensor, blue optical level sensor is used to monitor the water level and decide whether to replenish water, red optical level sensor is used to prevent the overflow. ATO One 2 SE has rich status indication, when the refill water overflows or overtime, when the water in the refill container is insufficient, ATO One 2 SE will have indicator light and buzzer alarm.
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria. Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
 

Directions

Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser. To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Install check valve (not included) inline with tubing outside of the aquarium Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.

Overview

The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.

Directions

Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser. To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage. Install check valve (not included) inline with tubing outside of the aquarium Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.  

Overview

The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing. Compatible with 6 mm (1/4") - Standard Airline Tubing.
 

Directions

Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing). To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware. Install check valve, if desired, (not included) inline with tubing outside of the aquarium Mount your U Tube over the rim of your aquarium in the desired location
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare