For growing hardwater and softwater plants side by side. Improves Shrimp health in softwater tanks. RO Remineralizer.
Removes chlorine, chloramine, and ammonia
Detoxifies nitrite and nitrate
Highly concentrated
Marine and freshwater
Adjusts pH to the acidic range (4.5‑6.8)
Softens water by precipitating calcium and magnesium
Use with Neutral Regulator® to target a pH
Creates ideal environment for livebearers and brackish fish
Safe for plants
Effective alternative to the sodium chloride based aquarium salts so prevalent
Reduces stress when handling or transporting fish
Antiseptic for fish
Promotes healing
Marine and freshwater
Adjusts pH to 5.0—8.0
Designed for use in planted aquariums
Converts carbonate alkalinity (KH) into available CO2
Contains no phosphate
Content
For growing hardwater and softwater plants side by side. Improves Shrimp health in softwater tanks. RO Remineralizer.
Overview
Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe™ will not over-activate skimmers.
Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Safe™.
Directions
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
50 gram
Use 200 mg of Safe™ (included scoop) per each 200 L (50 US gallons) as needed to reduce chlorine and chloramine or per 50 L (13 US gallons) for ammonia.
NOTE: These directions supersede all other prior packaging.
All other sizes
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging.
Overview
Acid Regulator™ adjusts pH to the acidic range (4.5–5.5) and softens water by precipitating calcium and magnesium. Acid Regulator™ supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to acid pH.
Directions
Use 1 level teaspoon (5 g) for every 40 L (10 US gallons) daily until intended pH is reached. For precise dosing use the Seachem Digital Spoon Scale. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator®.
To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator
Acid Regulator
pH
1
1
6.8
1
2
6.4
1
3
6.2
1
4
6.1
1
6
6.0
1
9
5.8
Overview
Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering.
Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent
Directions
Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.
For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
Overview
StressGuard™ is the premium slime coat protection product. StressGuard™ will reduce stress and ammonia toxicity whenever handling or transporting fish. StressGuard™ binds to exposed protein in wounds to promote healing of injured fish and to reduce the likelihood of primary and secondary infections. StressGuard™ is compatible with all medications except those that are copper based. StressGuard™ is not amine based and will not interfere with Purigen®; or HyperSorb™ regeneration. StressGuard™ does not coat resins or clog filtration like competing “slime coat” type products can.
What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard™ has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard™.
Directions
Use 1/2–1 capful (2.5–5 mL) to every 40 L (10 US gallons) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.
Overview
Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.
Directions
To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale.
In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
