Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM VITALITY 100 mL

  • Vitamin and amino acid supplement
  • Enhanced with Vitamin C for marine fish
  • Helps prevent diseases due to deficiency like lateral line disease

Overview

Vitality™ is a comprehensive vitamin, amino acid, and trace element supplement developed to address nutritional requirements commonly associated with long term closed system housing of marine ornamental fish. Vitality™ contains ascorbic acid in a heavy base of spirulina and chlorella. Ascorbic acid is a cofactor in the hydroxylation of proline and lysine to components of procollagen, the precursor of collagen, necessary for the formation of connective tissues, scar tissue in wound repair, and bone matrix.* Both spirulina and chlorella contain a rich assortment of amino acids and vitamins. Vitality™ can be used on freshwater ornamental fish; however, it is specifically designed for marine fish.

*Nutritional Requirements of Fish, The National Research Council of the National Academy of Sciences, National Academy Press, Washington, DC, 1993, p. 21.

 

Directions

Shake well before using. For best results, soak fish food, such as Seachem’s NutriDiet® Flakes, in one capful of Nourish™ daily.

 

SKU: 000116149501 Category:

Quick Comparison

SettingsSEACHEM VITALITY 100 mL removeSEACHEM REEF DIP 100 mL removeSEACHEM REEF KALKWASSER removeSEACHEM GOLD SALT 300 g removeSEACHEM FRESH TRACE 250 mL removeSEACHEM BRACKISH SALT 300 g remove
NameSEACHEM VITALITY 100 mL removeSEACHEM REEF DIP 100 mL removeSEACHEM REEF KALKWASSER removeSEACHEM GOLD SALT 300 g removeSEACHEM FRESH TRACE 250 mL removeSEACHEM BRACKISH SALT 300 g remove
Image
SKU000116149501000116061506000116021609000116071604000116022606
Rating
Price
Stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Vitamin and amino acid supplement
  • Enhanced with Vitamin C for marine fish
  • Helps prevent diseases due to deficiency like lateral line disease
  • Coral disinfectant
  • Elemental iodine complex, disinfects corals
  • Good for use before introducing new corals
  • Very pure calcium hydroxide
  • Ideal for increasing calcium in top-off water
  • Increases pH with no impact on carbonate alkalinity
  • Creates ideal environment for goldfish
  • Aids in the prevention of nitrite poisoning
  • Trace elements supplement for freshwater fish
  • Contains only those elements actually demonstrated* to be required by fish
  • Creates ideal environment for livebearers and brackish fish
  • Safe for plants
  • Effective alternative to the sodium chloride based aquarium salts so prevalent
Content

Overview

Vitality™ is a comprehensive vitamin, amino acid, and trace element supplement developed to address nutritional requirements commonly associated with long term closed system housing of marine ornamental fish. Vitality™ contains ascorbic acid in a heavy base of spirulina and chlorella. Ascorbic acid is a cofactor in the hydroxylation of proline and lysine to components of procollagen, the precursor of collagen, necessary for the formation of connective tissues, scar tissue in wound repair, and bone matrix.* Both spirulina and chlorella contain a rich assortment of amino acids and vitamins. Vitality™ can be used on freshwater ornamental fish; however, it is specifically designed for marine fish.

*Nutritional Requirements of Fish, The National Research Council of the National Academy of Sciences, National Academy Press, Washington, DC, 1993, p. 21.

 

Directions

Shake well before using. For best results, soak fish food, such as Seachem’s NutriDiet® Flakes, in one capful of Nourish™ daily.
 

Overview

Reef Dip™ contains elemental iodine complexed to a protective slime coat for safely and gently disinfecting corals. It is effective against bacteria, fungus, and protozoans. It may be used prophylactically (without evidence of disease) or to remedy diseased specimens. It is safe to use with both stony and soft corals. It is also safe for anemones and polyps. Reef Dip™ provides a protective slime coat complex that covers the coral, holding the iodine in contact with the infected site for extended periods of time. In addition, the slime coat prevents infection from re-rentering the site.
 

Directions

Do not use in the aquarium. Use in a separate container. Remove 4 L (1 US gallon) of water from the source aquarium to a container suitable for dipping. Add 5–10 mL (1–2 capfuls) of Reef Dip™ and mix. Place coral specimen in dip for 15–30 minutes, depending on severity of problem. In very severe cases, a double dose may be used. With clear and accessible lesions, dip concentrate may be painted on lesions directly before placing in dip. Observe animals during treatment for evidence of adverse reactions such as excessive sliming.

Overview

Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution). While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
 

Directions

Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.

Overview

Gold Salt™ is designed to provide the optimal environment for all goldfish species. The use of Gold Salt™ also aids in the prevention of nitrite poisoning. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For pH control use Gold Buffer™. For dechlorination use Gold Basics™. For further goldfish environment enhancement, use Gold Trace™ to restore the proper level of trace elements and feed NutriDiet® Goldfish Flakes for thriving, healthy goldfish.

Directions

Use 18 g (1 tablespoon) for each 40 L (10 US gallons). Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in a small amount of freshwater before use. Avoid using salt when replacing evaporated water.

Overview

Fresh Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Fresh Trace™ contains only those elements actually demonstrated* to be required by fish. *Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.

Directions

Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Tropical Flakes for optimal fish health.

Overview

Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent  

Directions

Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.
  • For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
  • For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
  • For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
  • For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
  • For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
  • For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Seachem Packaging in Weight

500 g, 1 kg

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare