Replenish™ is a proprietary blend of salts designed to replenish physiologically relevant minerals that are removed by reverse osmosis or deionizing filtration. Replenish™ restores General Hardness (GH) using a balanced blend of both “soft” (sodium, potassium) and “hard” (calcium, magnesium) salts. Restoration of mineral content is essential since a complete lack of minerals will result in osmotic stress in those species whose osmoregulation systems are adapted to a mineralized environment. Severe osmotic stress can result in osmotic shock which will lead to rapid death.
To restore GH in the planted aquarium, we recommend Equilibrium™.
Directions
Add 5 mL (1 capful) Replenish™ to 40 L (10 US gallons) to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 20-40 L (5-10 US gallons.)
Necessary to prevent osmotic stress and osmotic shock
Detoxifies ammonia for up to 72 hours
Ideal for emergency situations
More effective than any other ammonia-binding product
Most concentrated product on the market
Very pure calcium hydroxide
Ideal for increasing calcium in top-off water
Increases pH with no impact on carbonate alkalinity
Natural organic waste management
Rapidly and safely eliminates sludge and detritus
Helps increase water clarity
Marine and freshwater
Trace elements supplement for Cichlids
Contains only those elements actually demonstrated* to be required by fish
Creates ideal environment both bettas and plants
Removes any chlorine, chloramine and detoxifies ammonia
Buffers to 7.0
Content
Overview
Replenish™ is a proprietary blend of salts designed to replenish physiologically relevant minerals that are removed by reverse osmosis or deionizing filtration. Replenish™ restores General Hardness (GH) using a balanced blend of both “soft” (sodium, potassium) and “hard” (calcium, magnesium) salts. Restoration of mineral content is essential since a complete lack of minerals will result in osmotic stress in those species whose osmoregulation systems are adapted to a mineralized environment. Severe osmotic stress can result in osmotic shock which will lead to rapid death.
To restore GH in the planted aquarium, we recommend Equilibrium™.
Directions
Add 5 mL (1 capful) Replenish™ to 40 L (10 US gallons) to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 20-40 L (5-10 US gallons.)
Overview
AmGuard™ safely, rapidly and efficiently detoxifies toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard™ is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly 72 hours. That’s at least twice as long as our competitors’ products. Unlike competing products, AmGuard™ converts it into a safe, non-toxic form that is readily removed by the tank’s biofilter. It does not alter pH.
Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard™ cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard™ also removes chlorine and chloramines.
Directions
Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia.
ADVANCED: If you have an Ammonia Alert® that is reading “Alert”, then use 1 capful (5 mL) for every 400 L (100 US gallons) daily. If it reads “Alarm”, then use 1 capful for every 200 L (50 US gallons) daily. If it reads “Toxic”, then use 1 capful for every 80 L (20 US gallons) daily.
EXPERT: If using our MultiTest™ Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 US gallons) to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard™ to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL.
If water temperature is above 30 °C (86 °F) do not use.
Overview
Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution).
While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
Directions
Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.
Overview
Pristine™ uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine™ increases water clarity and promotes overall better health for the aquatic environment.
The species of bacteria in Pristine™ are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.
The bacteria species in Pristine™ thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.
Directions
Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.
Overview
Cichlid Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace™ contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions
Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Cichlid Flakes for optimal fish health.
Overview
Betta Basics™ is designed to provide the optimal environment for both betta and plant. Betta Basics™ removes any chlorine, chloramine and detoxifies ammonia. It buffers the water to a pH of 7.0 and provides a healthy environment for fish and plant. Feed NutriDiet® Betta Pellet Food for optimal fish health.
Directions
Use with each water change. For best results also use 2–3 times per week. Add 1 capful (5 mL) per each 1.25 L (1.25 quarts) of water. In Betta-only bowls (i.e. no plant) use 1 capful per 4 L (1 US gallon) with water changes.
