CLEAR WATER is an Aqua Conditioner for eliminating phosphate (PO4) from aquarium water and it flocculates fine particles causing water cloudiness. The water becomes crystal clear with less algae growth by applying it to the planted aquarium
Increases pH with no impact on carbonate alkalinity
Concentrated blend of green and brown marine phytoplankton
Size ranges from 1-20 μm
Enhanced to increase the bioavailability of important nutrients
Adjusts pH to the alkaline range (7.1 – 7.6)
Supports the establishment of the optimal environment for all alkaline acclimated species
Use with Neutral Regulator® to target a pH
Removes chlorine, chloramine, and ammonia
Detoxifies nitrite and nitrate
Highly concentrated
Marine and freshwater
Trace elements supplement for Cichlids
Contains only those elements actually demonstrated* to be required by fish
Content
CLEAR WATER is an Aqua Conditioner for eliminating phosphate (PO4) from aquarium water and it flocculates fine particles causing water cloudiness. The water becomes crystal clear with less algae growth by applying it to the planted aquarium
Overview
Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution).
While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
Directions
Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.
Overview
Reef Phytoplankton™ is a concentrated blend of green and brown marine phytoplankton designed to provide the essential fatty acids, proteins, vitamins, amino acids, with biological carotenoids for invertebrate diet. Size ranges from 1-20 μm to feed a broad range of tropical marine aquarium filter feeders and invertebrates.
Reef Phytoplankton™ contains a natural source of carotenoids which provides essential proteins as well as a more bioavailable source of pigmentation when compared to other natural sources and synthetic pigments. Carotenoids provide the extra benefit of antioxidant activity.
In addition, Reef Phytoplankton™ is enhanced to increase the bioavailability of important nutrients such as proteins, lipids, B vitamins, and other organic pigments, thus, corals expend less energy to derive the nutritional benefit.
It is blended to contain the proper ratio of fatty acids, carbohydrates, and proteins. Blending phytoplankton yields better nutritional value. Studies * show increased consumption of phytoplankton in filter feeders when using mixed cultures versus a single culture of phytoplankton.
Directions
Shake well before using. Add 1 capful (5 mL) per 200 L (50 US gallons) of water twice weekly or as required to maintain coral growth. For best results, dose directly to aquarium; target feeding can overwhelm corals and have a negative impact. Refrigeration after opening is recommended, but not required.
Overview
Alkaline Regulator™ adjusts pH to the alkaline range (7.1–7.6) and supports the establishment of the optimal environment for all alkaline acclimated species (e.g. bosemani, various other rainbows etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to alkaline pH.
Directions
Use 1 level teaspoon (5 g) for every 40–80 L (10–20 US gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH. To lower pH, use Neutral Regulator®.
To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator
Alkaline Regulator
pH
4
1
7.1
2
1
7.2
1
1
7.3
1
2
7.4
1
5
7.5
Overview
Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe™ will not over-activate skimmers.
Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Safe™.
Directions
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
50 gram
Use 200 mg of Safe™ (included scoop) per each 200 L (50 US gallons) as needed to reduce chlorine and chloramine or per 50 L (13 US gallons) for ammonia.
NOTE: These directions supersede all other prior packaging.
All other sizes
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging.
Overview
Cichlid Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace™ contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions
Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Cichlid Flakes for optimal fish health.
