Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM AMGUARD

  • Detoxifies ammonia for up to 72 hours
  • Ideal for emergency situations
  • More effective than any other ammonia-binding product
  • Most concentrated product on the market

Overview

AmGuard™ safely, rapidly and efficiently detoxifies toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard™ is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly 72 hours. That’s at least twice as long as our competitors’ products. Unlike competing products, AmGuard™ converts it into a safe, non-toxic form that is readily removed by the tank’s biofilter. It does not alter pH.

Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard™ cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard™ also removes chlorine and chloramines.

 

 

Directions

Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia.

ADVANCED: If you have an Ammonia Alert® that is reading “Alert”, then use 1 capful (5 mL) for every 400 L (100 US gallons) daily. If it reads “Alarm”, then use 1 capful for every 200 L (50 US gallons) daily. If it reads “Toxic”, then use 1 capful for every 80 L (20 US gallons) daily.

EXPERT: If using our MultiTest™ Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 US gallons) to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard™ to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL.

If water temperature is above 30 °C (86 °F) do not use.

SKU: N/A Category:
Seachem Liquid Bottles

100 mL, 500 mL, 4 L

Quick Comparison

SettingsSEACHEM AMGUARD removeSEACHEM REEF DIP 100 mL removeSEACHEM AROWANA BUFFER 250 g removeSEACHEM PRIME removeSEACHEM STRESSGUARD removeSEACHEM REEF PHYTOPLANKTON remove
NameSEACHEM AMGUARD removeSEACHEM REEF DIP 100 mL removeSEACHEM AROWANA BUFFER 250 g removeSEACHEM PRIME removeSEACHEM STRESSGUARD removeSEACHEM REEF PHYTOPLANKTON remove
Image
SKU000116061506000116122603
Rating
Price
Stock

In stock

In stock

Out of stock

AvailabilityIn stockIn stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Detoxifies ammonia for up to 72 hours
  • Ideal for emergency situations
  • More effective than any other ammonia-binding product
  • Most concentrated product on the market
  • Coral disinfectant
  • Elemental iodine complex, disinfects corals
  • Good for use before introducing new corals
  • Adjusts pH to 6.5
  • Creates ideal environment for Asian Arowanas
  • Softens water
  • Enhances immunity
  • Complete and concentrated conditioner for both fresh and saltwater
  • Removes chlorine, chloramine
  • Detoxifies ammonia, nitrite, and nitrate
  • 5X more concentrated than competing products
  • Reduces stress when handling or transporting fish
  • Antiseptic for fish
  • Promotes healing
  • Marine and freshwater
  • Concentrated blend of green and brown marine phytoplankton
  • Size ranges from 1-20 μm
  • Enhanced to increase the bioavailability of important nutrients
Content

Overview

AmGuard™ safely, rapidly and efficiently detoxifies toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard™ is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly 72 hours. That’s at least twice as long as our competitors’ products. Unlike competing products, AmGuard™ converts it into a safe, non-toxic form that is readily removed by the tank’s biofilter. It does not alter pH. Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard™ cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard™ also removes chlorine and chloramines.
   

Directions

Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia. ADVANCED: If you have an Ammonia Alert® that is reading “Alert”, then use 1 capful (5 mL) for every 400 L (100 US gallons) daily. If it reads “Alarm”, then use 1 capful for every 200 L (50 US gallons) daily. If it reads “Toxic”, then use 1 capful for every 80 L (20 US gallons) daily. EXPERT: If using our MultiTest™ Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 US gallons) to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard™ to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL. If water temperature is above 30 °C (86 °F) do not use.

Overview

Reef Dip™ contains elemental iodine complexed to a protective slime coat for safely and gently disinfecting corals. It is effective against bacteria, fungus, and protozoans. It may be used prophylactically (without evidence of disease) or to remedy diseased specimens. It is safe to use with both stony and soft corals. It is also safe for anemones and polyps. Reef Dip™ provides a protective slime coat complex that covers the coral, holding the iodine in contact with the infected site for extended periods of time. In addition, the slime coat prevents infection from re-rentering the site.
 

Directions

Do not use in the aquarium. Use in a separate container. Remove 4 L (1 US gallon) of water from the source aquarium to a container suitable for dipping. Add 5–10 mL (1–2 capfuls) of Reef Dip™ and mix. Place coral specimen in dip for 15–30 minutes, depending on severity of problem. In very severe cases, a double dose may be used. With clear and accessible lesions, dip concentrate may be painted on lesions directly before placing in dip. Observe animals during treatment for evidence of adverse reactions such as excessive sliming.

Overview

Arowana Buffer™ adjusts pH to 6.5 from either a low or high pH and maintains it there for 2–4 weeks. It safely softens water by precipitating calcium and magnesium. It also supports the ability of arowanas to resist infections. It is the buffer of choice for conditioning water for Asian Arowanas.
 

Directions

Use 1 level teaspoon for every 40 L (10 gallons) once or twice a month (or as necessary to maintain a pH of 6.5.) Arowana Buffer™ may be initially used daily in cases of high alkalinity until 6.5 is established. It may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water.

Overview

Nearly all pet aquatics companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime®. Prime® is the complete and concentrated conditioner for both fresh and saltwater. Prime® removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Prime® will not over-activate skimmers.

Prime® is up to 5x more concentrated than competing products and is the second most concentrated dechlorinator on the market only after our own aquavitro® alpha™.

Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Prime®.
 

Directions

Use 1 capful (5 mL) for each 200 L (50 US gallons) of new water. For smaller volumes, please note each cap thread is approximately 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Overview

StressGuard™ is the premium slime coat protection product. StressGuard™ will reduce stress and ammonia toxicity whenever handling or transporting fish. StressGuard™ binds to exposed protein in wounds to promote healing of injured fish and to reduce the likelihood of primary and secondary infections. StressGuard™ is compatible with all medications except those that are copper based. StressGuard™ is not amine based and will not interfere with Purigen®; or HyperSorb™ regeneration. StressGuard™ does not coat resins or clog filtration like competing “slime coat” type products can. What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard™ has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard™.

Directions

Use 1/2–1 capful (2.5–5 mL) to every 40 L (10 US gallons) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Overview

Reef Phytoplankton™ is a concentrated blend of green and brown marine phytoplankton designed to provide the essential fatty acids, proteins, vitamins, amino acids, with biological carotenoids for invertebrate diet. Size ranges from 1-20 μm to feed a broad range of tropical marine aquarium filter feeders and invertebrates. Reef Phytoplankton™ contains a natural source of carotenoids which provides essential proteins as well as a more bioavailable source of pigmentation when compared to other natural sources and synthetic pigments. Carotenoids provide the extra benefit of antioxidant activity. In addition, Reef Phytoplankton™ is enhanced to increase the bioavailability of important nutrients such as proteins, lipids, B vitamins, and other organic pigments, thus, corals expend less energy to derive the nutritional benefit. It is blended to contain the proper ratio of fatty acids, carbohydrates, and proteins. Blending phytoplankton yields better nutritional value. Studies * show increased consumption of phytoplankton in filter feeders when using mixed cultures versus a single culture of phytoplankton.
 

Directions

Shake well before using. Add 1 capful (5 mL) per 200 L (50 US gallons) of water twice weekly or as required to maintain coral growth. For best results, dose directly to aquarium; target feeding can overwhelm corals and have a negative impact. Refrigeration after opening is recommended, but not required.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Seachem Liquid Bottles

100 mL, 500 mL, 4 L

Seachem Liquid Bottles

100 mL, 250 mL, 500 mL, 2 L, 4 L

Seachem Liquid Bottles

100 mL, 500 mL

Seachem Liquid Bottles

250 mL, 500 mL

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare