SUNSUN CANISTER FILTER HW-304BLogin to view price
|Settings||SUNSUN CANISTER FILTER HW-304B remove||SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM THE BAG 13 x 25 cm ( 5” x 10”) remove||COVE SKIMMER I-200 remove||SEACHEM PURIGEN remove||SEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" remove|
|Name||SUNSUN CANISTER FILTER HW-304B remove||SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM THE BAG 13 x 25 cm ( 5” x 10”) remove||COVE SKIMMER I-200 remove||SEACHEM PURIGEN remove||SEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" remove|
Out of stock
Only 1 left in stock
|Availability||Out of stock||In stock||In stock||Only 1 left in stock||In stock|
|Add to cart|
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
Telescoping intake pipe
The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts
The flow on the pump is adjustable using the dial on the front
Intake flow regulation
A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer
No filter cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles
A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
UnitLength: 8 1⁄16 in (20.5 cm) Width: 6 ⅛ in (15.5 cm) Height: 8 ⅜ in (21.4 cm)
Media ChamberLength: 7 ⅜ in (18.9 cm) Width: 2 9⁄16 in (6.6 cm) Height: 5 ⅞ in (15 cm)
Wall Clearance3 in (7.5 cm)
Tank Trim Clearance1 in (2.6 cm)
Internal Tank Clearance1 11⁄16 in (4.3 cm)
Aquarium SizeUp to 55 US gallons (200 Liters)
Flow Rate250 US GPH (1000 L/H)
Watts6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume0.32 US gallons (1.2 Liters)
Features at a Glance
3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
The Bag™ is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life. Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces. Sizes: 13 x 25.5 cm (5” x 9.5”)
Simply place desired filtration material e.g. Purigen®, CupriSorb™, etc. and close The Bag™ using the resealable locking closure. For best results, The Bag™ should be placed so as to maximize the flow of water through it.
Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use.
Purigen® removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%.
SelectivityPurigen® is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen® is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen® has barely begun to reach its potential. Purigen® generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen® removes that waste faster and more completely than anything else on the market.
CapacityPurigen’s® possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen® is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
RegnerationPurigen® can also be regenerated. As it adsorbs waste products, Purigen® will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off” the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.
Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag™. For best results, Purigen® should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
RegenerationSoak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime®, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer®, Neutral Regulator®). Original color and full activity should now be restored and Purigen® is ready for reuse. Caution: some slime coat products may permanently foul Purigen® and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
The Medium Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™. Sizes: 32 cm x 14 cm (12.5” x 5.5”)
Simply place desired filtration material e.g. MatrixCarbon®, PhosGuard™, etc. and close using the corrosion-resistant zipper. For best results, Zip Bag™ and filtration media should be placed so as to maximize the flow of water through it.