Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Flow regulation

The flow on the pump is adjustable using the dial on the front

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem’s Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit

Length: 6 ⅛ in (15.5 cm)
Width: 5 ⅛ in (13 cm)
Height: 7 ⅛ in (18 cm)

Media Chamber

Length: 5 ⅜ in (13.8 cm)
Width: 2 in (5.2 cm)
Height: 4 ⅞ in (12.5 cm)

Wall Clearance

2 ¾ in (7 cm)

Tank Trim Clearance

1316 in (2 cm)

Internal Tank Clearance

1 ⅜ in (3.5 cm)

Technical Specifications
Aquarium Size

Up to 35 US gallons (130 Liters)

Flow Rate

130 US GPH (500 L/H)

Watts

6 – (120 v – 60 Hz)
5 – (230 v – 50 Hz)

Filter Volume

0.2 US gallons (0.7 Liters)

Features
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
Package Contents
  • Tidal 35 Filter
  • Foam filter
  • Matrix™ bio-media
  • Documentation
Warranty Information
3 Year Warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.

SKU: 000116065887 Category:

Quick Comparison

SettingsSEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P removeSEACHEM TIDAL IMPELLERS removeSEACHEM MATRIX removeSEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" removeAQUAVITRO PURFILTRUM 100 mL removeCOVE SKIMMER I-130 remove
NameSEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P removeSEACHEM TIDAL IMPELLERS removeSEACHEM MATRIX removeSEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" removeAQUAVITRO PURFILTRUM 100 mL removeCOVE SKIMMER I-130 remove
Image
SKU000116065887000116015226000116077514600000091
Rating
Price
Stock

In stock

In stock

In stock

Out of stock

AvailabilityIn stockIn stockIn stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description 
  • The Tidal™ Filter Impeller is self-cleaning, corrosion-resistant
  • Suited for both saltwater and freshwater environments
   
  • High capacity biofiltration
  • Controls ammonia, nitrite, and nitrate
  • Highly porous - enormous surface area (>~700 m2/L)
  • Supports aerobic and anaerobic bacteria species
  • Small-mesh filter bag with zipper
  • Ideal for small media
  • Corrosion-proof zipper
  • 32 cm x 14 cm (12.5” x 5.5”)
  • No Strings or Ties
  • Ultra high capacity organic waste removal
  • Removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products
  • Regenerable
  • Capability: 300-600 Liter
  • Pump: AquaBee UP1000 AC
  • Power: 10 Watt
  • Dimensions: 160 x 245 x 500mm
  • Sylinder: 135mm
  • Water level: 160-190mm
Content

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Flow regulation

The flow on the pump is adjustable using the dial on the front

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit
Length: 6 ⅛ in (15.5 cm) Width: 5 ⅛ in (13 cm) Height: 7 ⅛ in (18 cm)
Media Chamber
Length: 5 ⅜ in (13.8 cm) Width: 2 in (5.2 cm) Height: 4 ⅞ in (12.5 cm)
Wall Clearance
2 ¾ in (7 cm)
Tank Trim Clearance
1316 in (2 cm)
Internal Tank Clearance
1 ⅜ in (3.5 cm)
Technical Specifications
Aquarium Size
Up to 35 US gallons (130 Liters)
Flow Rate
130 US GPH (500 L/H)
Watts
6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume
0.2 US gallons (0.7 Liters)
Features
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
Package Contents
  • Tidal 35 Filter
  • Foam filter
  • Matrix™ bio-media
  • Documentation
Warranty Information
3 Year Warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
  The Tidal™ Filter Impeller is self-cleaning, corrosion-resistant and suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Overview

Matrix™ is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Matrix™ is a porous inorganic solid about 10 mm in diameter. Each liter of Matrix™ provides as much surface (>~700 m2) as 170 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix™ provides both external and internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and denitrifying bacteria. This allows Matrix™, unlike other forms of biomedia, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. Matrix™ is completely inert and will not breakdown. It need not be replaced. Since the majority of the bacteria are internal, Matrix™ may be rinsed when needed without damaging the filter. Matrix™ is compatible with all types of wet or wet-dry filters.
 

Directions

Use 250 mL of Matrix™ for each 200 L (50 US gallons)** of water. Matrix™ may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix™ is sufficiently large that no filter bag should be required for most applications. Matrix™ works well in drip tray systems, but you may find that the larger Pond Matrix™ is better suited for such applications. Use with Stability® to more rapidly establish the bio-filter. **This dosage may differ from your packaging. Based on updated studies, we've found Matrix™ treats even more water than previously asserted.

Overview

The Small Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding small to intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™. (Do not use with resins)   Sizes: 32 cm x 14 cm (12.5” x 5.5”)

Zip Bag Sm

  • Dimensions 32 x 14 cm (12.5” x 5.5”)
  • Mesh Size 25 Mesh
  • Closure Mechanism Zipper
  • Material PVC
  • Seams Stitched
  • Resistant to bleach, caustics, and acids Corrosion-Proof Zipper
  • Media Compatibility PhosNet, PhosBond, PhosGuard, aquavitro phosfiltrum, MatrixCarbon, SeaGel, Renew, Zeolite.

Overview

purfiltrum™ is a unique macro-porous synthetic polymer that removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products. It is the highest capacity organic filtration resin on the market outperforming even Seachem Purigen®, binding 10 to 15% more organic material. purfiltrum™ controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise be converted into these harmful chemicals. purfiltrum™ will not reduce the levels of trace elements, and it significantly raises redox. It polishes water to unparalleled clarity. purfiltrum™ progressively darkens as it removes impurities, and is easily renewed by treating with bleach per recommended regeneration instructions. purfiltrum™ is designed for both marine and freshwater use.

Directions

Rinse before use. Use in a fine mesh filter bag such as Seachem's The Bag™. Each 225 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Regeneration: Once it is exhausted, it can be easily regenerated with a solution of bleach and water. Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well-ventilated area, away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 3 tablespoons of alpha™, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak beads for 4 hours in a solution containing 2 tablespoons of buffer (Seachem Discus Buffer® or Neutral Regulator®) per cup of water. The original color and full activity should now be restored and purfiltrum™ is ready for reuse. Caution: some slime coat products may permanently foul purfiltrum™ and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Tidal Filter

Tidal 35, Tidal 55, Tidal 75, Tidal 110

Seachem Matrix

250 mL, 500 mL, 1 L, 1 L (repacked), 2 L, 2 L (repacked), 3 L (repacked), 4 L, 4 L (repacked)

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare