SUNSUN FLOSS SPONGE HW-302Login to view price
|Settings||SUNSUN FLOSS SPONGE HW-302 remove||SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM DE*NITRATE 100 mL remove||SEACHEM ZEOLITE 250 mL remove||SEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" remove||COVE SKIMMER I-160 remove|
|Name||SUNSUN FLOSS SPONGE HW-302 remove||SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM DE*NITRATE 100 mL remove||SEACHEM ZEOLITE 250 mL remove||SEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" remove||COVE SKIMMER I-160 remove|
Out of stock
Out of stock
|Availability||Out of stock||In stock||In stock||In stock||In stock||Out of stock|
|Add to cart|
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
The flow on the pump is adjustable using the dial on the front
No filter cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
UnitLength: 6 ⅛ in (15.5 cm) Width: 5 ⅛ in (13 cm) Height: 7 ⅛ in (18 cm)
Media ChamberLength: 5 ⅜ in (13.8 cm) Width: 2 in (5.2 cm) Height: 4 ⅞ in (12.5 cm)
Wall Clearance2 ¾ in (7 cm)
Tank Trim Clearance13⁄16 in (2 cm)
Internal Tank Clearance1 ⅜ in (3.5 cm)
Aquarium SizeUp to 35 US gallons (130 Liters)
Flow Rate130 US GPH (500 L/H)
Watts6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume0.2 US gallons (0.7 Liters)
3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
de❊nitrate™ is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although de❊nitrate™ has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic. “Live” rocks or reef rocks remove nitrate by anaerobic denitrification. de❊nitrate™ removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous de❊nitrate™. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria. de❊nitrate™ is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.
For best results, de❊nitrate™ should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix™ or Pond Matrix™. It is best to rinse off dust before use. Once de❊nitrate™ has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of de❊nitrate™ treats about 100–200 L (25–50 US gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.
Seachem Zeolite™ is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism. It has the highest ammonia binding capacity of any available zeolite; ten times higher than some products and twice the capacity of the closest competitor. It won’t deplete calcium in saltwater, and it won’t increase general hardness in freshwater, where the ionic strength is low.
For best results, Seachem Zeolite™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as Seachem’s The Bag™ or Zip Bag™ is recommended. Use 250 mL (1 cup) of Seachem Zeolite™ for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level teaspoon) per 4 L (1 US gallon). This amount of Seachem Zeolite™ will remove up to 0.5 mg/L ammonia. Monitor ammonia levels, which should drop to zero within 24-48 hours. At this point, the zeolite can be removed or replaced with activated carbon, such as Seachem MatrixCarbon™. For heavy metals removal, leave in service and replace monthly. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia.
The Small Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding small to intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™. (Do not use with resins) Sizes: 32 cm x 14 cm (12.5” x 5.5”)
Zip Bag Sm