SUNSUN CANISTER FILTER HW-5000 [1800-4600 l/h]Login to view price
|Settings||SUNSUN CANISTER FILTER HW-5000 [1800-4600 l/h] remove||SEACHEM TIDAL FOAM FILTER SPONGES remove||SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove||COVE MEDIA REACTOR R-80 remove||SEACHEM DE*NITRATE 100 mL remove||SEACHEM RENEW 100 mL remove|
|Name||SUNSUN CANISTER FILTER HW-5000 [1800-4600 l/h] remove||SEACHEM TIDAL FOAM FILTER SPONGES remove||SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove||COVE MEDIA REACTOR R-80 remove||SEACHEM DE*NITRATE 100 mL remove||SEACHEM RENEW 100 mL remove|
Out of stock
|Availability||Out of stock||In stock||In stock||In stock||In stock|
|Add to cart|
COVE MEDIA REACTOR R-80
|Content||The Foam Filter Sponge (35, 55, 75, & 110) acts as mechanical filtration, trapping detritus and other large particulates. It is your first stage of filtration, and its use will help extend the life of chemical filtration media. Every Tidal™ filter comes with one Foam Filter Sponge to get you started.|
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
Telescoping intake pipe
The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts
The flow on the pump is adjustable using the dial on the front
Intake flow regulation
A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer
No filter cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles
A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
UnitLength: 8 1⁄16 in (20.5 cm) Width: 6 ⅛ in (15.5 cm) Height: 8 ⅜ in (21.4 cm)
Media ChamberLength: 7 ⅜ in (18.9 cm) Width: 2 9⁄16 in (6.6 cm) Height: 5 ⅞ in (15 cm)
Wall Clearance3 in (7.5 cm)
Tank Trim Clearance1 in (2.6 cm)
Internal Tank Clearance1 11⁄16 in (4.3 cm)
Aquarium SizeUp to 55 US gallons (200 Liters)
Flow Rate250 US GPH (1000 L/H)
Watts6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume0.32 US gallons (1.2 Liters)
Features at a Glance
3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
de❊nitrate™ is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although de❊nitrate™ has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic. “Live” rocks or reef rocks remove nitrate by anaerobic denitrification. de❊nitrate™ removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous de❊nitrate™. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria. de❊nitrate™ is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.
For best results, de❊nitrate™ should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix™ or Pond Matrix™. It is best to rinse off dust before use. Once de❊nitrate™ has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of de❊nitrate™ treats about 100–200 L (25–50 US gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.
Renew™ is ideal for use in systems where phosphate released from all activated carbons poses a problem. Renew™ is also less aggressive than carbon, making it well suited for reefs and planted aquaria. It is also beneficial for use in soft water aquaria where the pH-raising property of many carbons is not an asset. Renew™ will remove organics and particulates in the sub-micron range; it will also help control ammonia, nitrates, and phosphates.
Renew™ should be used in exactly the same manner as activated carbon. Use 250 mL for each 120–160 L (30–40 US gallons). For best results, Renew™ should be placed so as to maximize the flow of water through it. Use in a filter bag such as the Zip Bag™. Although Renew™ is clean, it is advisable to rinse before use. It lasts about the same as carbon (4–6 weeks).