Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM ZIP BAG – MEDIUM MESH 12.5″ x 5.5″

  • Medium-mesh filter bag with zipper
  • Ideal for intermediate sized media
  • Corrosion-proof zipper
  • 32 cm x 14 cm (12.5” x 5.5”)
  • No Strings or Ties

Overview

The Medium Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™.

Sizes: 32 cm x 14 cm (12.5” x 5.5”)

  • Dimensions
    32 x 14 cm (12.5” x 5.5”)
  • Mesh Size
    16 Mesh
  • Closure Mechanism
    Zipper
  • Material
    PVC
  • Seams
    Stitched
  • Resistant to bleach, caustics, and acids
    Corrosion-Proof Zipper
  • Media Compatibility
    PhosGuard, MatrixCarbon, SeaGel, de❊nitrate, Renew, Matrix,

Directions

Simply place desired filtration material e.g. MatrixCarbon®, PhosGuard™, etc. and close using the corrosion-resistant zipper. For best results, Zip Bag™ and filtration media should be placed so as to maximize the flow of water through it.

SKU: 000116015219 Category:

Quick Comparison

SettingsSEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" removeAQUAVITRO PURFILTRUM 100 mL removeSEACHEM PHOSBOND 100 mL removeCOVE CALCIUM REACTOR CR-150 removeSEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" removeSEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove
NameSEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" removeAQUAVITRO PURFILTRUM 100 mL removeSEACHEM PHOSBOND 100 mL removeCOVE CALCIUM REACTOR CR-150 removeSEACHEM ZIP BAG - SMALL MESH 12.5" x 5.5" removeSEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove
Image
SKU000116015219000116077514000116126007600000095000116015226000116065887
Rating
Price
Stock

In stock

In stock

In stock

Out of stock

In stock

In stock

AvailabilityIn stockIn stockIn stockOut of stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Medium-mesh filter bag with zipper
  • Ideal for intermediate sized media
  • Corrosion-proof zipper
  • 32 cm x 14 cm (12.5” x 5.5”)
  • No Strings or Ties
  • Ultra high capacity organic waste removal
  • Removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products
  • Regenerable
  • Rapidly removes phosphate & silicate
  • Ferric oxide coated aluminum oxide phosphate adsorber
  • High porosity and surface area give it a large binding capacity
  • Small-mesh filter bag with zipper
  • Ideal for small media
  • Corrosion-proof zipper
  • 32 cm x 14 cm (12.5” x 5.5”)
  • No Strings or Ties
Content

Overview

The Medium Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™. Sizes: 32 cm x 14 cm (12.5” x 5.5”)
  • Dimensions 32 x 14 cm (12.5” x 5.5”)
  • Mesh Size 16 Mesh
  • Closure Mechanism Zipper
  • Material PVC
  • Seams Stitched
  • Resistant to bleach, caustics, and acids Corrosion-Proof Zipper
  • Media Compatibility PhosGuard, MatrixCarbon, SeaGel, de❊nitrate, Renew, Matrix,

Directions

Simply place desired filtration material e.g. MatrixCarbon®, PhosGuard™, etc. and close using the corrosion-resistant zipper. For best results, Zip Bag™ and filtration media should be placed so as to maximize the flow of water through it.

Overview

purfiltrum™ is a unique macro-porous synthetic polymer that removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products. It is the highest capacity organic filtration resin on the market outperforming even Seachem Purigen®, binding 10 to 15% more organic material. purfiltrum™ controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise be converted into these harmful chemicals. purfiltrum™ will not reduce the levels of trace elements, and it significantly raises redox. It polishes water to unparalleled clarity. purfiltrum™ progressively darkens as it removes impurities, and is easily renewed by treating with bleach per recommended regeneration instructions. purfiltrum™ is designed for both marine and freshwater use.

Directions

Rinse before use. Use in a fine mesh filter bag such as Seachem's The Bag™. Each 225 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Regeneration: Once it is exhausted, it can be easily regenerated with a solution of bleach and water. Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well-ventilated area, away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 3 tablespoons of alpha™, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak beads for 4 hours in a solution containing 2 tablespoons of buffer (Seachem Discus Buffer® or Neutral Regulator®) per cup of water. The original color and full activity should now be restored and purfiltrum™ is ready for reuse. Caution: some slime coat products may permanently foul purfiltrum™ and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.

Overview

PhosBond™ is a revolutionary new product that combines the phosphate removing capabilities of both aluminum oxide and granular ferric oxide into a singular material forming a synergistic effect. It rapidly removes phosphates and silicates from saltwater and freshwater, combining the best of both types of phosphate removers. Its high porosity and surface area give it a large binding capacity, while its physical strength and integrity assures that it will not break down from mechanical stress.
Comparing Seachem Phosphate Removers
Product PO4 bound
PhosGuard (Alumina Oxide) 0.87 mg/g
PhosBond (GFO and Alumina Oxide hybrid) 1.19 mg/g
PhosNet (GFO) 1.41 mg/g

Directions

For best results, PhosBond™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as The Bag is recommended. Use 60 mL (1/4 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosBond™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosBond™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
  • Pump: AquaBee UP 2000
  • Power: 15 Watt
  • Dimension: 315 x 330 x 610 mm
  • Capacity: 500 - 1500 Liter
  • Calcium Rock: 3 - 6 Liter
  • Magnesium Rock: 1-3 Liter

Overview

The Small Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding small to intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™. (Do not use with resins)   Sizes: 32 cm x 14 cm (12.5” x 5.5”)

Zip Bag Sm

  • Dimensions 32 x 14 cm (12.5” x 5.5”)
  • Mesh Size 25 Mesh
  • Closure Mechanism Zipper
  • Material PVC
  • Seams Stitched
  • Resistant to bleach, caustics, and acids Corrosion-Proof Zipper
  • Media Compatibility PhosNet, PhosBond, PhosGuard, aquavitro phosfiltrum, MatrixCarbon, SeaGel, Renew, Zeolite.

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Flow regulation

The flow on the pump is adjustable using the dial on the front

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit
Length: 6 ⅛ in (15.5 cm) Width: 5 ⅛ in (13 cm) Height: 7 ⅛ in (18 cm)
Media Chamber
Length: 5 ⅜ in (13.8 cm) Width: 2 in (5.2 cm) Height: 4 ⅞ in (12.5 cm)
Wall Clearance
2 ¾ in (7 cm)
Tank Trim Clearance
1316 in (2 cm)
Internal Tank Clearance
1 ⅜ in (3.5 cm)
Technical Specifications
Aquarium Size
Up to 35 US gallons (130 Liters)
Flow Rate
130 US GPH (500 L/H)
Watts
6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume
0.2 US gallons (0.7 Liters)
Features
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
Package Contents
  • Tidal 35 Filter
  • Foam filter
  • Matrix™ bio-media
  • Documentation
Warranty Information
3 Year Warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare