Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM TIDAL FILTER, 75 GAL. (285 L) ROW 230 V, 50 Hz, EU, 2P

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Telescoping intake pipe

The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts

Flow regulation

The flow on the pump is adjustable using the dial on the front

Intake flow regulation

A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem’s Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles

Heater holder

A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit

Length: 10 ⅛ in (25.5 cm)
Width: 7 in (17.8 cm)
Height: 9 ½ in (24.2 cm)

Media Chamber

Length: 9 ⅜ in (23.9 cm)
Width: 3 in (7.6 cm)
Height: 7 in (18 cm)

Wall Clearance

3 ½ in (8.5 cm)

Tank Trim Clearance

516 (3.3 cm)

Internal Tank Clearance

1 ¾ in (4.3 cm)

Technical Specifications
Aquarium Size

Up to 75 US gallons (300 Liters)

Flow Rate

350 US GPH (1500 L/H)

Watts

8 – (120 v – 60 Hz)
7 – (230 v – 50 Hz)

Filter Volume

0.50 US gallons (1.9 Liters)

Features at a Glance
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Intake flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Telescoping intake pipe
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
  • Heater holder
Package Contents
  • Tidal 75 Filter
  • Heater holder
  • Telescoping intake pipe
  • Leveling dial
  • Foam filter
  • Matrix™ bio-media
  • Instruction Manual
Warranty Information
3 Year Warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.

SKU: 000116065238 Category:

Quick Comparison

SettingsSEACHEM TIDAL FILTER, 75 GAL. (285 L) ROW 230 V, 50 Hz, EU, 2P removeCOVE MEDIA REACTOR R-100 removeSEACHEM TIDAL FOAM FILTER SPONGES removeSEACHEM TIDAL IMPELLERS removeSEACHEM MATRIX CARBON removeSEACHEM ZEOLITE 250 mL remove
NameSEACHEM TIDAL FILTER, 75 GAL. (285 L) ROW 230 V, 50 Hz, EU, 2P removeCOVE MEDIA REACTOR R-100 removeSEACHEM TIDAL FOAM FILTER SPONGES removeSEACHEM TIDAL IMPELLERS removeSEACHEM MATRIX CARBON removeSEACHEM ZEOLITE 250 mL remove
Image
SKU00011606523866665560000116012720
Rating
Price
Stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionMedia reactor
  • The Foam Filter Sponge acts as mechanical filtration
  • Trapping detritus and other large particulates
  • It is your first stage of filtration, and its use will help extend the life of chemical filtration media.
 
 
  • The Tidal™ Filter Impeller is self-cleaning, corrosion-resistant
  • Suited for both saltwater and freshwater environments
   
  • High efficiency spherical carbon
  • Very little impact on pH due to low ash content
  • Lowest leachable phosphate level on market
  • High removal capacity; large surface area
  • Binds ammonia and heavy metals
  • Highest ammonia binding capacity of any zeolite
  • Removes harmful metal ions like lead, copper, nickel and zinc
  • Marine & Freshwater
Content

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Telescoping intake pipe

The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts

Flow regulation

The flow on the pump is adjustable using the dial on the front

Intake flow regulation

A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles

Heater holder

A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit
Length: 10 ⅛ in (25.5 cm) Width: 7 in (17.8 cm) Height: 9 ½ in (24.2 cm)
Media Chamber
Length: 9 ⅜ in (23.9 cm) Width: 3 in (7.6 cm) Height: 7 in (18 cm)
Wall Clearance
3 ½ in (8.5 cm)
Tank Trim Clearance
516 (3.3 cm)
Internal Tank Clearance
1 ¾ in (4.3 cm)
Technical Specifications
Aquarium Size
Up to 75 US gallons (300 Liters)
Flow Rate
350 US GPH (1500 L/H)
Watts
8 - (120 v - 60 Hz) 7 - (230 v - 50 Hz)
Filter Volume
0.50 US gallons (1.9 Liters)
Features at a Glance
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Intake flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Telescoping intake pipe
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
  • Heater holder
Package Contents
  • Tidal 75 Filter
  • Heater holder
  • Telescoping intake pipe
  • Leveling dial
  • Foam filter
  • Matrix™ bio-media
  • Instruction Manual
Warranty Information
3 Year Warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
The Foam Filter Sponge (35, 55, 75, & 110) acts as mechanical filtration, trapping detritus and other large particulates. It is your first stage of filtration, and its use will help extend the life of chemical filtration media. Every Tidal™ filter comes with one Foam Filter Sponge to get you started.  The Tidal™ Filter Impeller is self-cleaning, corrosion-resistant and suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Overview

MatrixCarbon™ is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of macroporous binding sites. MatrixCarbon™ has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0. While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon™ has the lowest detectable leachable phosphate content of all major carbon brands tested. MatrixCarbon™ outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. While carbon is generally considered to be a chemical filter, that is not precisely true. It is in fact a mechanical filter as well, but it is only capable of mechanically filtering objects of molecular size. It functions through extremely small cracks and crevices, called macropores and micropores. Microporous carbons remove primarily metals and smaller ions (like trace minerals) and are best suited to air filtration, while macroporous carbons remove primarily larger organic molecules (like nitrogenous waste) and are best suited to water filtration. The ingredients from which a carbon is manufactured determine whether it will be macro- or microporous. Carbons made from coconut shell and other organic products form microporous carbons, while carbons made from bituminous coal form macroporous carbons. MatrixCarbon™ is a bituminous coal-based, macroporous carbon. It is the only spherical carbon on the market, allowing for maximum water flow. It is sized to allow full penetration by water, but not small enough to escape filter bags. All carbons contain phosphate. However, that phosphate DOES NOT come from washing the carbon with phosphoric acid. Most carbons are washed with sulfuric acid. The phosphate is contained in the ash from the carbon source. The main purpose of acid-washing is to remove ash. Because of MatrixCarbon’s™ hydrodynamic properties, more ash is washed from our carbon than any other. Therefore, it has the lowest leachable phosphate on the market.
 

Directions

250 mL will easily treat 400 L (100 US gallons) for several months. Use in a filter bag. Rinse before use. For best results, MatrixCarbon™ should be placed so as to maximize the flow of water through it. It may be used in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter.

Overview

Seachem Zeolite™ is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism. It has the highest ammonia binding capacity of any available zeolite; ten times higher than some products and twice the capacity of the closest competitor. It won’t deplete calcium in saltwater, and it won’t increase general hardness in freshwater, where the ionic strength is low.

Directions

For best results, Seachem Zeolite™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as Seachem’s The Bag™ or Zip Bag™ is recommended. Use 250 mL (1 cup) of Seachem Zeolite™ for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level teaspoon) per 4 L (1 US gallon). This amount of Seachem Zeolite™ will remove up to 0.5 mg/L ammonia. Monitor ammonia levels, which should drop to zero within 24-48 hours. At this point, the zeolite can be removed or replaced with activated carbon, such as Seachem MatrixCarbon™. For heavy metals removal, leave in service and replace monthly. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia.
 
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Tidal Filter

Tidal 35, Tidal 55, Tidal 75, Tidal 110

Tidal Filter

Tidal 35, Tidal 55, Tidal 75, Tidal 110

Seachem Liquid Bottles

100 mL, 250 mL

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare