SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P
Login to view priceFeatures
Ventilation slots
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
Bottom-to-top flow
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Maintenance alert
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
Surface skimmer
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
Telescoping intake pipe
The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts
Flow regulation
The flow on the pump is adjustable using the dial on the front
Intake flow regulation
A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer
No filter cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem’s Matrix™ bio-media to get you started.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
Self-cleaning impeller
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles
Heater holder
A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
Dimensions
Unit
Length: 8 1⁄16 in (20.5 cm)
Width: 6 ⅛ in (15.5 cm)
Height: 8 ⅜ in (21.4 cm)
Media Chamber
Length: 7 ⅜ in (18.9 cm)
Width: 2 9⁄16 in (6.6 cm)
Height: 5 ⅞ in (15 cm)
Wall Clearance
3 in (7.5 cm)
Tank Trim Clearance
1 in (2.6 cm)
Internal Tank Clearance
1 11⁄16 in (4.3 cm)
Technical Specifications
Aquarium Size
Up to 55 US gallons (200 Liters)
Flow Rate
250 US GPH (1000 L/H)
Watts
6 – (120 v – 60 Hz)
5 – (230 v – 50 Hz)
Filter Volume
0.32 US gallons (1.2 Liters)
Features at a Glance
- Reversible filter cover
- Maintenance alert device
- Overflow prevention
- Large-capacity filter basket
- Aerating return flow
- Flow regulation
- Intake flow regulation
- Surface skimmer
- Sub-surface intake
- Telescoping intake pipe
- Leveling dial
- Self-priming pump
- Self-cleaning impeller
- Heater holder
Package Contents
- Tidal 55 Filter
- Heater holder
- Telescoping intake pipe
- Leveling dial
- Foam filter
- Matrix™ bio-media
- Instruction Manual
Warranty Information
3 Year Warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
Quick Comparison
| Settings | SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove | SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove | SEACHEM ZEOLITE 250 mL remove | COVE SKIMMER I-200 remove | SEACHEM RENEW 100 mL remove | COVE CALCIUM REACTOR CR-150 remove |
|---|---|---|---|---|---|---|
| Name | SEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P remove | SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2P remove | SEACHEM ZEOLITE 250 mL remove | COVE SKIMMER I-200 remove | SEACHEM RENEW 100 mL remove | COVE CALCIUM REACTOR CR-150 remove |
| Image |  |  |  |  |  |  |
| SKU | 000116065221 | 000116065887 | 000116012720 | 600000093 | 000116008501 | 600000095 |
| Rating | ||||||
| Price | ||||||
| Stock | In stock | In stock | In stock | Only 1 left in stock | In stock | Out of stock |
| Availability | In stock | In stock | In stock | Only 1 left in stock | In stock | Out of stock |
| Add to cart | ||||||
| Description |
| |||||
| Content | Features Ventilation slotsVentilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration. Bottom-to-top flowThe pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow. Maintenance alertOver time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned. Surface skimmerThe surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris Telescoping intake pipeThe adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts Flow regulationThe flow on the pump is adjustable using the dial on the front Intake flow regulationA dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer No filter cartridgesThe filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started. No mess maintenanceThe basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning. Self-priming pumpSelf-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter Self-cleaning impellerThe self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments. Adjustable leveling deviceA leveler on the base of the filter lets the filter adjust to a variety of aquarium styles Heater holderA heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium. 3 year warrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts. DimensionsUnitLength: 8 1⁄16 in (20.5 cm) Width: 6 ⅛ in (15.5 cm) Height: 8 ⅜ in (21.4 cm)Media ChamberLength: 7 ⅜ in (18.9 cm) Width: 2 9⁄16 in (6.6 cm) Height: 5 ⅞ in (15 cm)Wall Clearance3 in (7.5 cm)Tank Trim Clearance1 in (2.6 cm)Internal Tank Clearance1 11⁄16 in (4.3 cm)Technical SpecificationsAquarium SizeUp to 55 US gallons (200 Liters)Flow Rate250 US GPH (1000 L/H)Watts6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)Filter Volume0.32 US gallons (1.2 Liters)Features at a Glance
Package Contents
Warranty Information3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. | Features Ventilation slotsVentilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration. Bottom-to-top flowThe pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow. Maintenance alertOver time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned. Surface skimmerThe surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris Flow regulationThe flow on the pump is adjustable using the dial on the front No filter cartridgesThe filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started. No mess maintenanceThe basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning. Self-priming pumpSelf-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter Self-cleaning impellerThe self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments. Adjustable leveling deviceA leveler on the base of the filter lets the filter adjust to a variety of aquarium styles. 3 year warrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts. DimensionsUnitLength: 6 ⅛ in (15.5 cm) Width: 5 ⅛ in (13 cm) Height: 7 ⅛ in (18 cm)Media ChamberLength: 5 ⅜ in (13.8 cm) Width: 2 in (5.2 cm) Height: 4 ⅞ in (12.5 cm)Wall Clearance2 ¾ in (7 cm)Tank Trim Clearance13⁄16 in (2 cm)Internal Tank Clearance1 ⅜ in (3.5 cm)Technical SpecificationsAquarium SizeUp to 35 US gallons (130 Liters)Flow Rate130 US GPH (500 L/H)Watts6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)Filter Volume0.2 US gallons (0.7 Liters)Features
Package Contents
Warranty Information3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. | Overview
Seachem Zeolite™ is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism. It has the highest ammonia binding capacity of any available zeolite; ten times higher than some products and twice the capacity of the closest competitor. It won’t deplete calcium in saltwater, and it won’t increase general hardness in freshwater, where the ionic strength is low.
Directions
For best results, Seachem Zeolite™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as Seachem’s The Bag™ or Zip Bag™ is recommended.
Use 250 mL (1 cup) of Seachem Zeolite™ for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level teaspoon) per 4 L (1 US gallon). This amount of Seachem Zeolite™ will remove up to 0.5 mg/L ammonia. Monitor ammonia levels, which should drop to zero within 24-48 hours. At this point, the zeolite can be removed or replaced with activated carbon, such as Seachem MatrixCarbon™. For heavy metals removal, leave in service and replace monthly. For long term ammonia control, use Seachem Stability® and Matrix™. Use Ammonia Alert® or MultiTest™ Free & Total Ammonia to directly monitor levels of free ammonia.
| Overview
Renew™ is ideal for use in systems where phosphate released from all activated carbons poses a problem. Renew™ is also less aggressive than carbon, making it well suited for reefs and planted aquaria. It is also beneficial for use in soft water aquaria where the pH-raising property of many carbons is not an asset. Renew™ will remove organics and particulates in the sub-micron range; it will also help control ammonia, nitrates, and phosphates.
Directions
Renew™ should be used in exactly the same manner as activated carbon. Use 250 mL for each 120–160 L (30–40 US gallons). For best results, Renew™ should be placed so as to maximize the flow of water through it. Use in a filter bag such as the Zip Bag™. Although Renew™ is clean, it is advisable to rinse before use. It lasts about the same as carbon (4–6 weeks).
|
| |
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
