Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM STABILITY

  • New tank stabilization system for marine and freshwater
  • Rapidly and safely establishes bio-filter
  • Prevents “New Tank Syndrome”

Overview

Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: “new tank syndrome”. Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use.

Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.

The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® is not limited this way. The necessary conditions for the growth of Stability’s™ bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability™ simply becomes more effective.

 

Directions

Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture.

Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™.

SKU: N/A Category:
Seachem Liquid Bottles

100 mL, 250 mL, 500 mL, 2 L

Quick Comparison

SettingsSEACHEM STABILITY removeSEACHEM TANGANYIKA BUFFER 250 g removeSEACHEM PRISTINE removeSEACHEM GOLD SALT 300 g removeSEACHEM REEF KALKWASSER removeSEACHEM ACID REGULATOR 50 g remove
NameSEACHEM STABILITY removeSEACHEM TANGANYIKA BUFFER 250 g removeSEACHEM PRISTINE removeSEACHEM GOLD SALT 300 g removeSEACHEM REEF KALKWASSER removeSEACHEM ACID REGULATOR 50 g remove
Image
SKU000116028608000116021609000116007405
Rating
Price
Stock

Out of stock

In stock

In stock

AvailabilityOut of stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • New tank stabilization system for marine and freshwater
  • Rapidly and safely establishes bio-filter
  • Prevents "New Tank Syndrome"
  • Adjusts pH to 9.0-9.4
  • Raises KH as well pH
  • Will not affect GH
  • Natural organic waste management
  • Rapidly and safely eliminates sludge and detritus
  • Helps increase water clarity
  • Marine and freshwater
  • Creates ideal environment for goldfish
  • Aids in the prevention of nitrite poisoning
  • Very pure calcium hydroxide
  • Ideal for increasing calcium in top-off water
  • Increases pH with no impact on carbonate alkalinity
  • Adjusts pH to the acidic range (4.5‑6.8)
  • Softens water by precipitating calcium and magnesium
  • Use with Neutral Regulator® to target a pH
Content

Overview

Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use.

Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.

The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® is not limited this way. The necessary conditions for the growth of Stability's™ bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability™ simply becomes more effective.
 

Directions

Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™.

Overview

Tanganyika Buffer™ is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing alkalinity, carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 9.0–9.4. For optimum replication of the Tanganyikan environment, use with Cichlid Lake Salt™, Cichlid Trace™, and NutriDiet® Cichlid Flakes.  

Directions

Use 5 g (1 level teaspoon) for each 40–80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks. TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem’s Cichlid Lake Salt™) and between water changes as needed to maintain pH. Seachem’s Tanganyika Buffer™ is formulated to maintain a pH between 9.0 and 9.4, depending on the amount used. For lower pH, use Malawi/Victoria Buffer™ (pH 7.8–8.4), either alone or in combination with Tanganyika Buffer™.

Overview

Pristine™ uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine™ increases water clarity and promotes overall better health for the aquatic environment.

The species of bacteria in Pristine™ are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.

The bacteria species in Pristine™ thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.
 

Directions

Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.

Overview

Gold Salt™ is designed to provide the optimal environment for all goldfish species. The use of Gold Salt™ also aids in the prevention of nitrite poisoning. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For pH control use Gold Buffer™. For dechlorination use Gold Basics™. For further goldfish environment enhancement, use Gold Trace™ to restore the proper level of trace elements and feed NutriDiet® Goldfish Flakes for thriving, healthy goldfish.

Directions

Use 18 g (1 tablespoon) for each 40 L (10 US gallons). Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in a small amount of freshwater before use. Avoid using salt when replacing evaporated water.

Overview

Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution). While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
 

Directions

Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.

Overview

Acid Regulator™ adjusts pH to the acidic range (4.5–5.5) and softens water by precipitating calcium and magnesium. Acid Regulator™ supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish. Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to acid pH.
 

Directions

Use 1 level teaspoon (5 g) for every 40 L (10 US gallons) daily until intended pH is reached. For precise dosing use the Seachem Digital Spoon Scale. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator®. To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
  To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator Acid Regulator pH
1 1 6.8
1 2 6.4
1 3 6.2
1 4 6.1
1 6 6.0
1 9 5.8
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Seachem Liquid Bottles

100 mL, 250 mL, 500 mL, 2 L

Seachem Liquid Bottles

100 mL, 250 mL

Seachem Packaging in Weight

500 g, 1 kg

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare