Reef Fusion 1™ and Reef Fusion 2™ are the foundation of a system formulated to provide the essentials for the reef aquarium. Reef Fusion 1™ provides calcium, while Reef Fusion 2™ provides alkalinity. When used together, the Reef Fusion™ system will maintain calcium and alkalinity levels.
Reef Fusion 2™
Reef Fusion 2™ contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth.
When used as directed, Reef Fusion 1™ and Reef Fusion 2™ will maintain the critical levels of calcium and alkalinity necessary for healthy coral growth, while providing biologically appropriate levels of other elements and trace minerals.
Directions
Dose aquarium every 1-2 days. Shake well before using. Add 1 mL of Reef Fusion 1™ per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 mL.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2™ in the same manner, 1 mL per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1™ with Reef Fusion 2™ directly.
Maintain calcium level between 380-420 mg/L. Maintain alkalinity between 3-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges, but do not exceed 4 mL/25 L (6.5 US gallons) per day
Most concentrated two part system; simple 1:1 ratio
Very pure calcium hydroxide
Ideal for increasing calcium in top-off water
Increases pH with no impact on carbonate alkalinity
Adjusts pH to the acidic range (4.5‑6.8)
Softens water by precipitating calcium and magnesium
Use with Neutral Regulator® to target a pH
Removes chlorine, chloramine, and ammonia
Detoxifies nitrite and nitrate
Highly concentrated
Marine and freshwater
Coral disinfectant
Elemental iodine complex, disinfects corals
Good for use before introducing new corals
Creates ideal environment both bettas and plants
Removes any chlorine, chloramine and detoxifies ammonia
Buffers to 7.0
Content
Overview
Reef Fusion 1™ and Reef Fusion 2™ are the foundation of a system formulated to provide the essentials for the reef aquarium. Reef Fusion 1™ provides calcium, while Reef Fusion 2™ provides alkalinity. When used together, the Reef Fusion™ system will maintain calcium and alkalinity levels.
Reef Fusion 2™
Reef Fusion 2™ contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth.
When used as directed, Reef Fusion 1™ and Reef Fusion 2™ will maintain the critical levels of calcium and alkalinity necessary for healthy coral growth, while providing biologically appropriate levels of other elements and trace minerals.
Directions
Dose aquarium every 1-2 days. Shake well before using. Add 1 mL of Reef Fusion 1™ per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 mL.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2™ in the same manner, 1 mL per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1™ with Reef Fusion 2™ directly.
Maintain calcium level between 380-420 mg/L. Maintain alkalinity between 3-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges, but do not exceed 4 mL/25 L (6.5 US gallons) per day
Overview
Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution).
While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
Directions
Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.
Overview
Acid Regulator™ adjusts pH to the acidic range (4.5–5.5) and softens water by precipitating calcium and magnesium. Acid Regulator™ supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to acid pH.
Directions
Use 1 level teaspoon (5 g) for every 40 L (10 US gallons) daily until intended pH is reached. For precise dosing use the Seachem Digital Spoon Scale. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator®.
To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator
Acid Regulator
pH
1
1
6.8
1
2
6.4
1
3
6.2
1
4
6.1
1
6
6.0
1
9
5.8
Overview
Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe™ will not over-activate skimmers.
Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Safe™.
Directions
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
50 gram
Use 200 mg of Safe™ (included scoop) per each 200 L (50 US gallons) as needed to reduce chlorine and chloramine or per 50 L (13 US gallons) for ammonia.
NOTE: These directions supersede all other prior packaging.
All other sizes
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging.
Overview
Reef Dip™ contains elemental iodine complexed to a protective slime coat for safely and gently disinfecting corals. It is effective against bacteria, fungus, and protozoans. It may be used prophylactically (without evidence of disease) or to remedy diseased specimens. It is safe to use with both stony and soft corals. It is also safe for anemones and polyps.
Reef Dip™ provides a protective slime coat complex that covers the coral, holding the iodine in contact with the infected site for extended periods of time. In addition, the slime coat prevents infection from re-rentering the site.
Directions
Do not use in the aquarium. Use in a separate container. Remove 4 L (1 US gallon) of water from the source aquarium to a container suitable for dipping. Add 5–10 mL (1–2 capfuls) of Reef Dip™ and mix. Place coral specimen in dip for 15–30 minutes, depending on severity of problem. In very severe cases, a double dose may be used. With clear and accessible lesions, dip concentrate may be painted on lesions directly before placing in dip. Observe animals during treatment for evidence of adverse reactions such as excessive sliming.
Overview
Betta Basics™ is designed to provide the optimal environment for both betta and plant. Betta Basics™ removes any chlorine, chloramine and detoxifies ammonia. It buffers the water to a pH of 7.0 and provides a healthy environment for fish and plant. Feed NutriDiet® Betta Pellet Food for optimal fish health.
Directions
Use with each water change. For best results also use 2–3 times per week. Add 1 capful (5 mL) per each 1.25 L (1.25 quarts) of water. In Betta-only bowls (i.e. no plant) use 1 capful per 4 L (1 US gallon) with water changes.
