SEACHEM PURIGEN
Overview
Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use.
Purigen® removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%.
Selectivity
Purigen® is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen® is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen® has barely begun to reach its potential. Purigen® generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen® removes that waste faster and more completely than anything else on the market.
Capacity
Purigen’s® possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen® is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.
Regneration
Purigen® can also be regenerated. As it adsorbs waste products, Purigen® will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off” the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.
Directions
Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag™. For best results, Purigen® should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
Regeneration
Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime®, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer®, Neutral Regulator®). Original color and full activity should now be restored and Purigen® is ready for reuse. Caution: some slime coat products may permanently foul Purigen® and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
| Seachem Liquid Bottles | 100 mL, 250 mL |
|---|
Quick Comparison
| Settings | SEACHEM PURIGEN remove | AQUAVITRO PURFILTRUM 100 mL remove | COVE CALCIUM REACTOR CR-150 remove | SEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" remove | SEACHEM PHOSBOND 100 mL remove | COVE SKIMMER I-200 remove | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | SEACHEM PURIGEN remove | AQUAVITRO PURFILTRUM 100 mL remove | COVE CALCIUM REACTOR CR-150 remove | SEACHEM ZIP BAG - MEDIUM MESH 12.5" x 5.5" remove | SEACHEM PHOSBOND 100 mL remove | COVE SKIMMER I-200 remove | ||||||||
| Image |  |  |  |  |  |  | ||||||||
| SKU | 000116077514 | 600000095 | 000116015219 | 000116126007 | 600000093 | |||||||||
| Rating | ||||||||||||||
| Price | ||||||||||||||
| Stock | In stock | Out of stock | In stock | In stock | Only 1 left in stock | |||||||||
| Availability | In stock | Out of stock | In stock | In stock | Only 1 left in stock | |||||||||
| Add to cart | ||||||||||||||
| Description |
| |||||||||||||
| Content | Overview
Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use.
Purigen® removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%.SelectivityPurigen® is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen® is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen® has barely begun to reach its potential. Purigen® generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen® removes that waste faster and more completely than anything else on the market.CapacityPurigen’s® possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen® is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.RegnerationPurigen® can also be regenerated. As it adsorbs waste products, Purigen® will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off” the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.Directions
Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag™. For best results, Purigen® should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
RegenerationSoak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime®, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer®, Neutral Regulator®). Original color and full activity should now be restored and Purigen® is ready for reuse. Caution: some slime coat products may permanently foul Purigen® and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit. | Overview
purfiltrum™ is a unique macro-porous synthetic polymer that removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products. It is the highest capacity organic filtration resin on the market outperforming even Seachem Purigen®, binding 10 to 15% more organic material. purfiltrum™ controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise be converted into these harmful chemicals. purfiltrum™ will not reduce the levels of trace elements, and it significantly raises redox. It polishes water to unparalleled clarity. purfiltrum™ progressively darkens as it removes impurities, and is easily renewed by treating with bleach per recommended regeneration instructions. purfiltrum™ is designed for both marine and freshwater use.
Directions
Rinse before use. Use in a fine mesh filter bag such as Seachem's The Bag™. Each 225 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
Regeneration: Once it is exhausted, it can be easily regenerated with a solution of bleach and water. Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well-ventilated area, away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 3 tablespoons of alpha™, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak beads for 4 hours in a solution containing 2 tablespoons of buffer (Seachem Discus Buffer® or Neutral Regulator®) per cup of water. The original color and full activity should now be restored and purfiltrum™ is ready for reuse. Caution: some slime coat products may permanently foul purfiltrum™ and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
|
| Overview
The Medium Zip Bag™ is a mesh bag for holding filtration media. It is available in a 32 cm x 14 cm (12.5” x 5.5”) size , easily holds 1 liter of filtration media, and it comes with a convenient corrosion-resistant zipper. It has a mesh size that is capable of holding intermediate and larger sized filter media including PhosGuard™, MatrixCarbon™, SeaGel™, de❊nitrate™, Renew™, Matrix™, Zeolite™.
Sizes: 32 cm x 14 cm (12.5” x 5.5”)
Directions
Simply place desired filtration material e.g. MatrixCarbon®, PhosGuard™, etc. and close using the corrosion-resistant zipper. For best results, Zip Bag™ and filtration media should be placed so as to maximize the flow of water through it.
| Overview
PhosBond™ is a revolutionary new product that combines the phosphate removing capabilities of both aluminum oxide and granular ferric oxide into a singular material forming a synergistic effect. It rapidly removes phosphates and silicates from saltwater and freshwater, combining the best of both types of phosphate removers. Its high porosity and surface area give it a large binding capacity, while its physical strength and integrity assures that it will not break down from mechanical stress.
Comparing Seachem Phosphate Removers
Directions
For best results, PhosBond™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as The Bag is recommended.
Use 60 mL (1/4 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosBond™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosBond™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
| |||||||||
| Weight | ||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||
| Additional information |
|
Related products
-
Read moreLogin to view priceFeatures Ventilation slots Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration. Bottom-to-top flow The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being …
SEACHEM TIDAL FILTER, 35 GAL. (135 L) ROW 230 V, 50 Hz, EU, 2PRead More
