Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

SEACHEM PRISTINE

  • Natural organic waste management
  • Rapidly and safely eliminates sludge and detritus
  • Helps increase water clarity
  • Marine and freshwater

Overview

Pristine™ uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine™ increases water clarity and promotes overall better health for the aquatic environment.

The species of bacteria in Pristine™ are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.

The bacteria species in Pristine™ thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.

 

Directions

Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.

SKU: N/A Category:
Seachem Liquid Bottles

100 mL, 250 mL

Quick Comparison

SettingsSEACHEM PRISTINE removeSEACHEM BETTA BASICS removeSEACHEM ACID BUFFER 70 g removeSEACHEM BRACKISH SALT 300 g removeSEACHEM PRIME removeSEACHEM ALKALINE REGULATOR 50 g remove
NameSEACHEM PRISTINE removeSEACHEM BETTA BASICS removeSEACHEM ACID BUFFER 70 g removeSEACHEM BRACKISH SALT 300 g removeSEACHEM PRIME removeSEACHEM ALKALINE REGULATOR 50 g remove
Image
SKU000116024402000116022606000116009409
Rating
Price
Stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Natural organic waste management
  • Rapidly and safely eliminates sludge and detritus
  • Helps increase water clarity
  • Marine and freshwater
  • Creates ideal environment both bettas and plants
  • Removes any chlorine, chloramine and detoxifies ammonia
  • Buffers to 7.0
  • Adjusts pH to 5.0—8.0
  • Designed for use in planted aquariums
  • Converts carbonate alkalinity (KH) into available CO2
  • Contains no phosphate
  • Creates ideal environment for livebearers and brackish fish
  • Safe for plants
  • Effective alternative to the sodium chloride based aquarium salts so prevalent
  • Complete and concentrated conditioner for both fresh and saltwater
  • Removes chlorine, chloramine
  • Detoxifies ammonia, nitrite, and nitrate
  • 5X more concentrated than competing products
  • Adjusts pH to the alkaline range (7.1 – 7.6)
  • Supports the establishment of the optimal environment for all alkaline acclimated species
  • Use with Neutral Regulator® to target a pH
Content

Overview

Pristine™ uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine™ increases water clarity and promotes overall better health for the aquatic environment.

The species of bacteria in Pristine™ are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.

The bacteria species in Pristine™ thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.
 

Directions

Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.

Overview

Betta Basics™ is designed to provide the optimal environment for both betta and plant. Betta Basics™ removes any chlorine, chloramine and detoxifies ammonia. It buffers the water to a pH of 7.0 and provides a healthy environment for fish and plant. Feed NutriDiet® Betta Pellet Food for optimal fish health.
 

Directions

Use with each water change. For best results also use 2–3 times per week. Add 1 capful (5 mL) per each 1.25 L (1.25 quarts) of water. In Betta-only bowls (i.e. no plant) use 1 capful per 4 L (1 US gallon) with water changes.

Overview

Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.

Directions

To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart. HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required. This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
1 1.3 6.5
1 2.0 7.0
1 2.5 7.5
1 4.0 8.0

Overview

Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent  

Directions

Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.
  • For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
  • For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
  • For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
  • For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
  • For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
  • For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).

Overview

Nearly all pet aquatics companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime®. Prime® is the complete and concentrated conditioner for both fresh and saltwater. Prime® removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Prime® will not over-activate skimmers.

Prime® is up to 5x more concentrated than competing products and is the second most concentrated dechlorinator on the market only after our own aquavitro® alpha™.

Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Prime®.
 

Directions

Use 1 capful (5 mL) for each 200 L (50 US gallons) of new water. For smaller volumes, please note each cap thread is approximately 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Overview

Alkaline Regulator™ adjusts pH to the alkaline range (7.1–7.6) and supports the establishment of the optimal environment for all alkaline acclimated species (e.g. bosemani, various other rainbows etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish. Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to alkaline pH.
 

Directions

Use 1 level teaspoon (5 g) for every 40–80 L (10–20 US gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH. To lower pH, use Neutral Regulator®. To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
  To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator Alkaline Regulator pH
4 1 7.1
2 1 7.2
1 1 7.3
1 2 7.4
1 5 7.5
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Seachem Liquid Bottles

100 mL, 250 mL

SEACHEM BETTA BASICS

60 mL, 250 mL

Seachem Liquid Bottles

100 mL, 250 mL, 500 mL, 2 L, 4 L

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare