SEACHEM GLASS IN LINE DIFFUSER 13 mm
The 13 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 12 mm ID/16 mm OD hoses. Compatible with 6 mm (1/4″) – Standard Airline Tubing. Suction cups included.
Rinse glassware with warm water. Cut filter hose (Compatible with 12 mm ID / 16 mm OD filter hose) to appropriate length so that inline diffuser will hang vertically next to aquarium glass when filter outflow is placed on aquarium. Attach aquarium hose, ensuring that diffuser disc faces “up” toward outflow. Attach suction cups and desired tubing (Compatible with 6 mm (1/4″) – Standard Airline Tubing) to the CO2 in line of the diffuser.
Install check valve (not included) inline with 6 mm (1/4″) tubing (CO2 in)
To attach tubing and hose to glassware, wet the inside of the tubing or hose with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing or hose, do not pull tubing off of glassware. Instead, cut tubing or hose carefully along the attachment length to release the glassware.
Mount your inline diffuser using the suction cup(s). It should be positioned so that it sits vertically on the side or back of the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Once securely mounted, turn on filter. Ensure that water passes through diffuser and into aquarium without leaks or bubbles. Turn on CO2. Observe bubble count (bubble counter not included) and adjust CO2 to desired flow rate. Seachem Bubble Counter available for easy monitoring of CO2 flow.
Quick Comparison
Settings | SEACHEM GLASS IN LINE DIFFUSER 13 mm remove | DOOA TERRA TAPE remove | COVE PVC water pipe - Red 25mm remove | ADA Spring Washer M (for pipes above Φ17mm) remove | COVE PVC water pipe - Red 50mm remove | SEACHEM GLASS BEETLE DIFFUSER 27mm remove |
---|---|---|---|---|---|---|
Name | SEACHEM GLASS IN LINE DIFFUSER 13 mm remove | DOOA TERRA TAPE remove | COVE PVC water pipe - Red 25mm remove | ADA Spring Washer M (for pipes above Φ17mm) remove | COVE PVC water pipe - Red 50mm remove | SEACHEM GLASS BEETLE DIFFUSER 27mm remove |
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
SKU | 000116031615 | 4537934562022 | 66665564 | 4537934029266 | 66665566 | 000116031530 |
Rating | ||||||
Price | ||||||
Stock | In stock | In stock | In stock | In stock | In stock | In stock |
Availability | In stock | In stock | In stock | In stock | In stock | In stock |
Add to cart | ||||||
Description | Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium. | This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped. | ||||
Content |
The 13 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 12 mm ID/16 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
Rinse glassware with warm water. Cut filter hose (Compatible with 12 mm ID / 16 mm OD filter hose) to appropriate length so that inline diffuser will hang vertically next to aquarium glass when filter outflow is placed on aquarium. Attach aquarium hose, ensuring that diffuser disc faces “up” toward outflow. Attach suction cups and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the CO2 in line of the diffuser.
Install check valve (not included) inline with 6 mm (1/4") tubing (CO2 in)
To attach tubing and hose to glassware, wet the inside of the tubing or hose with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing or hose, do not pull tubing off of glassware. Instead, cut tubing or hose carefully along the attachment length to release the glassware.
Mount your inline diffuser using the suction cup(s). It should be positioned so that it sits vertically on the side or back of the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Once securely mounted, turn on filter. Ensure that water passes through diffuser and into aquarium without leaks or bubbles. Turn on CO2. Observe bubble count (bubble counter not included) and adjust CO2 to desired flow rate. Seachem Bubble Counter available for easy monitoring of CO2 flow.
| Overview
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 27 mm disc allows for the diffusion of large volumes of CO2 gas, making the 27 mm Beetle Diffuser an excellent choice for mid-sized aquaria or higher-growth aquaria.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
| ||||
Weight | ||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
Additional information |