SEACHEM EQUILIBRIUM 300 g

Equilibrium™ is specifically designed to establish the ideal mineral content for the planted aquarium. Equilibrium™ contains no sodium or chloride (which can be detrimental to a planted aquarium at elevated levels). Equilibrium™ is ideally suited for use with RO (reverse osmosis) or DI (deionized) water or any mineral deficient water. Equilibrium™ raises the essential mineral/electrolyte content (General Hardness) of the water to balance with and promote stability of the carbonate hardness. To maintain KH, we recommend Alkaline Buffer™. Unlike competing products, Equilibrium™ contains NO SODIUM CHLORIDE. Both sodium and chloride are not rapidly depleted elements in a planted aquarium, and, in the case of chloride, can do more harm than good. Competitors’ products generally contain primarily sodium chloride (because it is inexpensive), which will raise the electrolyte levels for fish, but can be detrimental to plant growth. In addition, sodium is not a contributing cation to GH levels. Equilibrium™ contains only calcium, magnesium, and potassium salts, which aid in fish metabolism, but are also highly beneficial to plant growth. Equilibrium™ guaranteed analysis and symptoms of deficiency Directions To raise mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16 g (1 tablespoon) for every 80 L (20 US gallons) when setting up an aquarium or when making water changes (add to new water). For optimum solubility we recommend mixing with 1 L (1 qt.) of water (the resulting mixture will have a white opaque appearance). When this mixture is added to the aquarium it will impart a slight haze that should clear within 15–30 minutes. HINTS: Do not use Equilibrium™ when replacing evaporated water. This dose is based on DI or RO water; for other water, measure hardness (GH) first, then add according to need. For precise dosing, use the Seachem Digital Spoon Scale. Plant preferences vary, but a general guide is about 1–2 meq/L (3–6 dH) or match the existing or target carbonate hardness (KH), which, ideally, is also about 1–2 meq/L (3–6 dKH). Equilibrium™ will compact with age, but remains effective.

Nearly all pet aquatics companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime®. Prime® is the complete and concentrated conditioner for both fresh and saltwater. Prime® removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Prime® will not over-activate skimmers. Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Prime®.

Use 1 capful (5 mL) for each 200 L (50 US gallons) of new water. For smaller volumes, please note each cap thread is approximately 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Neutral Regulator® adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, and detoxifying ammonia. The use of Neutral Regulator® makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator® with Acid Regulator™ (or Discus Buffer®). To raise pH above 7.0 use with Alkaline Regulator™. All of these products will enhance and stabilize the freshwater aquarium environment. For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish. Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to neutral pH.

Arowana Buffer™ adjusts pH to 6.5 from either a low or high pH and maintains it there for 2–4 weeks. It safely softens water by precipitating calcium and magnesium. It also supports the ability of arowanas to resist infections. It is the buffer of choice for conditioning water for Asian Arowanas.

Use 1 level teaspoon for every 40 L (10 gallons) once or twice a month (or as necessary to maintain a pH of 6.5.) Arowana Buffer™ may be initially used daily in cases of high alkalinity until 6.5 is established. It may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water.

Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent  

Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.

• For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
• For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
• For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
• For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
• For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
• For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).

Use 1 capful (5 mL) for every 80 L (20 US gallons). In some situations the cloudiness may increase after adding Clarity™, however this is normal and is a sign that Clarity™ is actively working. Rapid clarification will follow (1–2 hours). In the case of chemical or particulate clouding clean filter floss or cartridge after tank clears.