Cichlid Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace™ contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions
Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Cichlid Flakes for optimal fish health.
Contains only those elements actually demonstrated* to be required by fish
Creates ideal environment both bettas and plants
Removes any chlorine, chloramine and detoxifies ammonia
Buffers to 7.0
Creates ideal environment for livebearers and brackish fish
Safe for plants
Effective alternative to the sodium chloride based aquarium salts so prevalent
Adjusts pH to 5.0—8.0
Designed for use in planted aquariums
Converts carbonate alkalinity (KH) into available CO2
Contains no phosphate
Adjusts pH to neutral (pH 7.0) from either a low or high pH
Softens water by precipitating calcium and magnesium
Removes chlorine, chloramine, or ammonia
Adjusts pH to the acidic range (4.5‑6.8)
Softens water by precipitating calcium and magnesium
Use with Neutral Regulator® to target a pH
Content
Overview
Cichlid Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace™ contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions
Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Cichlid Flakes for optimal fish health.
Overview
Betta Basics™ is designed to provide the optimal environment for both betta and plant. Betta Basics™ removes any chlorine, chloramine and detoxifies ammonia. It buffers the water to a pH of 7.0 and provides a healthy environment for fish and plant. Feed NutriDiet® Betta Pellet Food for optimal fish health.
Directions
Use with each water change. For best results also use 2–3 times per week. Add 1 capful (5 mL) per each 1.25 L (1.25 quarts) of water. In Betta-only bowls (i.e. no plant) use 1 capful per 4 L (1 US gallon) with water changes.
Overview
Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering.
Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent
Directions
Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.
For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
Overview
Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.
Directions
To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale.
In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
1
1.3
6.5
1
2.0
7.0
1
2.5
7.5
1
4.0
8.0
Overview
Neutral Regulator® adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, and detoxifying ammonia. The use of Neutral Regulator® makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator® with Acid Regulator™ (or Discus Buffer®). To raise pH above 7.0 use with Alkaline Regulator™. All of these products will enhance and stabilize the freshwater aquarium environment. For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to neutral pH.
Directions
Use 5 g (1 level teaspoon) for every 40–80 L (10–20 US gallons) once or twice a month (or as necessary to maintain a pH of 7.0.) Neutral Regulator® may be be initially used daily in cases of high alkalinity until 7.0 is established. It may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water. For precise dosing, use the Seachem Digital Spoon Scale.
Overview
Acid Regulator™ adjusts pH to the acidic range (4.5–5.5) and softens water by precipitating calcium and magnesium. Acid Regulator™ supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to acid pH.
Directions
Use 1 level teaspoon (5 g) for every 40 L (10 US gallons) daily until intended pH is reached. For precise dosing use the Seachem Digital Spoon Scale. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator®.
To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
To target a particular pH use in combination with Neutral Regulator® following the chart
