QANVEE QS-200A Sponge FilterLogin to view price
|Settings||QANVEE QS-200A Sponge Filter remove||SEACHEM TIDAL FILTER, 110 GAL. (415 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM TIDAL FILTER REPLACEMENT PUPMS remove||SEACHEM THE BAG 13 x 25 cm ( 5” x 10”) remove||AQUAVITRO PURFILTRUM 100 mL remove||SEACHEM TIDAL FOAM FILTER SPONGES remove|
|Name||QANVEE QS-200A Sponge Filter remove||SEACHEM TIDAL FILTER, 110 GAL. (415 L) ROW 230 V, 50 Hz, EU, 2P remove||SEACHEM TIDAL FILTER REPLACEMENT PUPMS remove||SEACHEM THE BAG 13 x 25 cm ( 5” x 10”) remove||AQUAVITRO PURFILTRUM 100 mL remove||SEACHEM TIDAL FOAM FILTER SPONGES remove|
Out of stock
|Availability||Out of stock||In stock||In stock||In stock|
|Add to cart|
Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.
The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.
Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.
The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris
Telescoping intake pipe
The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts
The flow on the pump is adjustable using the dial on the front
Intake flow regulation
A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer
No filter cartridges
The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.
No mess maintenance
The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.
Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter
The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.
Adjustable leveling device
A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles
A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.
3 year warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.
UnitLength: 11 ⅝ in (29.5 cm) Width: 7 ⅝ in (19.2 cm) Height: 9 ½ in (24.2 cm)
Media ChamberLength: 11 in (27.9 cm) Width: 3 ½ in (8.9 cm) Height: 7 ⅞ in (20 cm)
Wall Clearance4 in (9.5 cm)
Tank Trim Clearance1 ⅜ in (3.5 cm)
Internal Tank Clearance2 in (5 cm)
Aquarium SizeUp to 110 US gallons (400 Liters)
Flow Rate450 US GPH (2000 L/H)
Watts12 - (120 v - 60 Hz) 10 - (230 v - 50 Hz)
Filter Volume0.85 US gallons (3.2 Liters)
Features at a Glance
3 Year WarrantyAll Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.
|The Tidal™ Pump (35, 55, 75, & 110) is self-priming which means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter. This also means that filter will restart itself with no trouble after a power outage or after maintenance.|
The Bag™ is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life. Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces. Sizes: 13 x 25.5 cm (5” x 9.5”)
Simply place desired filtration material e.g. Purigen®, CupriSorb™, etc. and close The Bag™ using the resealable locking closure. For best results, The Bag™ should be placed so as to maximize the flow of water through it.
purfiltrum™ is a unique macro-porous synthetic polymer that removes soluble and insoluble organic impurities from water 5 to 10 times faster and more completely than all other competing products. It is the highest capacity organic filtration resin on the market outperforming even Seachem Purigen®, binding 10 to 15% more organic material. purfiltrum™ controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise be converted into these harmful chemicals. purfiltrum™ will not reduce the levels of trace elements, and it significantly raises redox. It polishes water to unparalleled clarity. purfiltrum™ progressively darkens as it removes impurities, and is easily renewed by treating with bleach per recommended regeneration instructions. purfiltrum™ is designed for both marine and freshwater use.
Rinse before use. Use in a fine mesh filter bag such as Seachem's The Bag™. Each 225 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Regeneration: Once it is exhausted, it can be easily regenerated with a solution of bleach and water. Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well-ventilated area, away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 3 tablespoons of alpha™, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak beads for 4 hours in a solution containing 2 tablespoons of buffer (Seachem Discus Buffer® or Neutral Regulator®) per cup of water. The original color and full activity should now be restored and purfiltrum™ is ready for reuse. Caution: some slime coat products may permanently foul purfiltrum™ and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
|The Foam Filter Sponge (35, 55, 75, & 110) acts as mechanical filtration, trapping detritus and other large particulates. It is your first stage of filtration, and its use will help extend the life of chemical filtration media. Every Tidal™ filter comes with one Foam Filter Sponge to get you started.|