Preferred pollen-style diffuser for large aquaria or high-growth aquaria
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Minimizes the visibility of CO2 equipment in the aquarium
Ensures maximum dissolution of CO2 in aquarium water
Allows for more consistent dosing of CO2
Compatible with 16 mm ID/22 mm OD hoses
Secure base for freshly cut corals and polyps
Contain calcium and magnesium sources for rapid growth
Unique shape aids overgrowth of encrusting coral or polyps
Exceptional particulate removal for superior water quality
WELDED
Content
Overview
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 27 mm disc allows for the diffusion of large volumes of CO2 gas, making the 27 mm Beetle Diffuser an excellent choice for mid-sized aquaria or higher-growth aquaria.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
The 17 mm glass Inline Diffuser is a pollen style inline CO2 diffuser that is placed in the outflow line of the filter or aquarium pump to efficiently diffuse CO2gas into the aquarium. This placement of the diffuser avoids the need for a diffuser in the aquarium and significantly reduces the visibility of the CO2injection system in the aquascape. This also allows for more rapid diffusion of CO2 into the system and can allow for more consistent levels and reduce waste of CO2 or overdose of CO2
Compatible with 16 mm ID/22 mm OD hoses. Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cups included.
Rinse glassware with warm water. Cut filter hose (Compatible with 12 mm ID / 16 mm OD filter hose) to appropriate length so that inline diffuser will hang vertically next to aquarium glass when filter outflow is placed on aquarium. Attach aquarium hose, ensuring that diffuser disc faces “up” toward outflow. Attach suction cups and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the CO2 in line of the diffuser.
Install check valve (not included) inline with 6 mm (1/4") tubing (CO2 in)
To attach tubing and hose to glassware, wet the inside of the tubing or hose with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing or hose, do not pull tubing off of glassware. Instead, cut tubing or hose carefully along the attachment length to release the glassware.
Mount your inline diffuser using the suction cup(s). It should be positioned so that it sits vertically on the side or back of the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Once securely mounted, turn on filter. Ensure that water passes through diffuser and into aquarium without leaks or bubbles. Turn on CO2. Observe bubble count (bubble counter not included) and adjust CO2 to desired flow rate. Seachem Bubble Counter available for easy monitoring of CO2 flow.
Overview
Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug.
Sizes: 12 Plugs
Directions
Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.
Overview
Filter socks are a critical component in maintaining water quality in aquariums. They remove suspended debris and detritus, which often lead to excess dissolved organics, nitrate, and phosphate when left unchecked. This makes Seachem Filter Socks an integral addition to any sump and overflow system.
Seachem Filter Socks feature durable, welded seams and have a singed finish, which reduces wear and prevents release of fibers back into the water column.
In addition to a 100 micron rating for exceptional particulate removal, they feature welded seams, which, unlike threaded seams of similar products, will not breakdown over time. They have a singed finish, which reduces wear and prevents release of fibers back into the water column. Finally, the plastic collar simplifies installation and easily fits standard sump fittings.
Dimensions : 10 x 30 cm / 4” x 12” (10 cm / 4” plastic collar)
Directions
Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
Read moreLogin to view price
