Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
Moss Cotton is a special thread to tie and fix moss on driftwood. In a quite dark green color similar to that of Willow moss and it will naturally biodegrade after Willow moss has taken root to the driftwood or rock.
For aquariums up to 75 L-190 L (20-50 US gallons)
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Built in bubble counter makes the use of a separate bubble counter unnecessary
Simple and easy to use
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.
It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.
Content
Overview
The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.
It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
