Shopping Cart

close

No products in the cart.

Return to shop

Shopping Cart

close

No products in the cart.

Return to shop
Back

DD CLARISEA SK5000 Gen3 AUTO FLEECE FILTER AND ALARM

AUTOMATIC FLEECE FILTER + SMART CONTROL & ALARM

The ClariSea fleece filter is an extremely compact, patented, high efficiency water filtration system, which continuously removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column. ClariSea is suitable for use in both marine and freshwater aquariums, fish-breeding and coral propagation systems.

  • Smallest installation footprint – easier to fit into sump
  • High volume filtration capacity – up to 5000 L/hr
  • Completely replaces the need for filter socks
  • Multi-function smart controller:
    – Automaticaly advances dirty fleece
    – End of roll audible and visual alarm
    – Filter jam/float error/overflow alarm
  • Integrated fail-safe overflow – prevents flooding
  • Simple-to-change fleece system, with fleece removal tool
  • Special 40m phosphate free, low-odour fleece material
  • Quick release silencer plates – for quiet operation
  • Easy to clean and maintain design
  • Water bypass system – to open during coral feeding
  • Multiple pipework installation options: 1”, 32mm, 40mm
SKU: 5060444554120 Category:

Quick Comparison

SettingsDD CLARISEA SK5000 Gen3 AUTO FLEECE FILTER AND ALARM removeCOVE MEDIA REACTOR R-80 removeSEACHEM MATRIX removeCOVE SKIMMER I-120 removeSEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P removeSEACHEM PURIGEN remove
NameDD CLARISEA SK5000 Gen3 AUTO FLEECE FILTER AND ALARM removeCOVE MEDIA REACTOR R-80 removeSEACHEM MATRIX removeCOVE SKIMMER I-120 removeSEACHEM TIDAL FILTER, 55 GAL. (208 L) ROW 230 V, 50 Hz, EU, 2P removeSEACHEM PURIGEN remove
Image
SKU506044455412066665559600000090000116065221
Rating
Price
Stock

In stock

In stock

Out of stock

In stock

AvailabilityIn stockIn stockOut of stockIn stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionAUTOMATIC FLEECE FILTER + SMART CONTROL & ALARM The ClariSea fleece filter is an extremely compact, patented, high efficiency water filtration system, which continuously removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column. ClariSea is suitable for use in both marine and freshwater aquariums, fish-breeding and coral propagation systems.

COVE MEDIA REACTOR R-80

  • High capacity biofiltration
  • Controls ammonia, nitrite, and nitrate
  • Highly porous - enormous surface area (>~700 m2/L)
  • Supports aerobic and anaerobic bacteria species
  • Capability: 200-400 Liter
  • PUMP: AquaBee UP800 AC
  • Power: 8 Watt
  • Dimensions: 142 x 225 x 450mm
  • Silinder: 120mm
  • Water level: 150-180mm
  • Highest organic removal capacity
  • Possesses enhanced capacity owing to its vast surface area; both spherical and macroreticular
  • Helps control ammonia/nitrite/nitrate
  • Color changes as it exhausts; easily regenerated
Content
  • Smallest installation footprint – easier to fit into sump
  • High volume filtration capacity – up to 5000 L/hr
  • Completely replaces the need for filter socks
  • Multi-function smart controller: - Automaticaly advances dirty fleece - End of roll audible and visual alarm - Filter jam/float error/overflow alarm
  • Integrated fail-safe overflow – prevents flooding
  • Simple-to-change fleece system, with fleece removal tool
  • Special 40m phosphate free, low-odour fleece material
  • Quick release silencer plates – for quiet operation
  • Easy to clean and maintain design
  • Water bypass system – to open during coral feeding
  • Multiple pipework installation options: 1”, 32mm, 40mm

Overview

Matrix™ is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Matrix™ is a porous inorganic solid about 10 mm in diameter. Each liter of Matrix™ provides as much surface (>~700 m2) as 170 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix™ provides both external and internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and denitrifying bacteria. This allows Matrix™, unlike other forms of biomedia, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. Matrix™ is completely inert and will not breakdown. It need not be replaced. Since the majority of the bacteria are internal, Matrix™ may be rinsed when needed without damaging the filter. Matrix™ is compatible with all types of wet or wet-dry filters.
 

Directions

Use 250 mL of Matrix™ for each 200 L (50 US gallons)** of water. Matrix™ may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix™ is sufficiently large that no filter bag should be required for most applications. Matrix™ works well in drip tray systems, but you may find that the larger Pond Matrix™ is better suited for such applications. Use with Stability® to more rapidly establish the bio-filter. **This dosage may differ from your packaging. Based on updated studies, we've found Matrix™ treats even more water than previously asserted.

Features

Ventilation slots

Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration.

Bottom-to-top flow

The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow.

Maintenance alert

Over time, filtration media can become clogged with detritus reducing or obstructing the flow of water through it. When this happens in Tidal™ filters, water is redirected around the filter and back into the aquarium through an outlet on the side. The redirected water pushes up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned.

Surface skimmer

The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank removing floating debris

Telescoping intake pipe

The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts

Flow regulation

The flow on the pump is adjustable using the dial on the front

Intake flow regulation

A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer

No filter cartridges

The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice. All Tidal™ Filters come with Seachem's Matrix™ bio-media to get you started.

No mess maintenance

The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning.

Self-priming pump

Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter

Self-cleaning impeller

The self-cleaning, corrosion-resistant impeller is suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments.

Adjustable leveling device

A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles

Heater holder

A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium.

3 year warranty

All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter. The warranty covers the replacement of the defective parts.

Dimensions
Unit
Length: 8 116 in (20.5 cm) Width: 6 ⅛ in (15.5 cm) Height: 8 ⅜ in (21.4 cm)
Media Chamber
Length: 7 ⅜ in (18.9 cm) Width: 2 916 in (6.6 cm) Height: 5 ⅞ in (15 cm)
Wall Clearance
3 in (7.5 cm)
Tank Trim Clearance
1 in (2.6 cm)
Internal Tank Clearance
1116 in (4.3 cm)
Technical Specifications
Aquarium Size
Up to 55 US gallons (200 Liters)
Flow Rate
250 US GPH (1000 L/H)
Watts
6 - (120 v - 60 Hz) 5 - (230 v - 50 Hz)
Filter Volume
0.32 US gallons (1.2 Liters)
Features at a Glance
  • Reversible filter cover
  • Maintenance alert device
  • Overflow prevention
  • Large-capacity filter basket
  • Aerating return flow
  • Flow regulation
  • Intake flow regulation
  • Surface skimmer
  • Sub-surface intake
  • Telescoping intake pipe
  • Leveling dial
  • Self-priming pump
  • Self-cleaning impeller
  • Heater holder
Package Contents
  • Tidal 55 Filter
  • Heater holder
  • Telescoping intake pipe
  • Leveling dial
  • Foam filter
  • Matrix™ bio-media
  • Instruction Manual
Warranty Information
3 Year Warranty
All Tidal™ Filters are guaranteed against defects of materials and workmanship for a period of 3 years from the date of purchase, except for the pump’s impeller. This can be extended to 5 years by registering your filter.

Overview

Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use.

Purigen® removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%.

Selectivity

Purigen® is the highest capacity organic filtration resin on the market. No other products can compare to its ability to clear haziness and polish water to unparalleled clarity. Unlike other products on the market which are simple ion-exchange resins, Purigen® is specifically designed to be an organic scavenging resin. When ion-exchange resins are filled to capacity by metals and other contaminants, Purigen® has barely begun to reach its potential. Purigen® generally ignores simple elemental compounds, having an extreme affinity for nitrogenous organics. The primary source of nitrogenous compounds in an aquarium is waste. Fish, corals, even plants produce nitrogenous waste. Purigen® removes that waste faster and more completely than anything else on the market.

Capacity

Purigen’s® possesses enhanced capacity owing to its vast surface area. All other resins on the market are purely spherical extruded beads. These beads remain smooth even under a microscope. Purigen® is both spherical and macroreticular. It has microscopic pores that increase its usable surface area to many times that of a purely spherical resin.

Regneration

Purigen® can also be regenerated. As it adsorbs waste products, Purigen® will change color from a pale blonde to a dark brown, almost black. Once it is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn off” the organics that have been removed from the tank. Watch out for products that claim to be regenerable with a brine solution. That is the regeneration procedure for ion-exchange purposes. A brine solution will not remove organics. While such resins have a limited capacity for organic adsorption, a brine regeneration process only replaces removed ionic compounds. It does not destroy large organic molecules that were removed, which is the primary function of organic adsorption resins.  

Directions

Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag. For best results, Purigen® should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.

Regeneration

Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime®, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer®, Neutral Regulator®). Original color and full activity should now be restored and Purigen® is ready for reuse. Caution: some slime coat products may permanently foul Purigen® and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Seachem Matrix

250 mL, 500 mL, 1 L, 1 L (repacked), 2 L, 2 L (repacked), 3 L (repacked), 4 L, 4 L (repacked)

Seachem Liquid Bottles

100 mL, 250 mL

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare