Exceptional particulate removal for superior water quality
WELDED
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
The collapsible water jug for transporting saltwater, RO water, and DI water
Glass U Tube joint for silicone tubing
20 mm size suitable for rimless aquariums and most standard aquarium rims
Great for use with CO2 injection systems or bubblers
Content
Overview
Filter socks are a critical component in maintaining water quality in aquariums. They remove suspended debris and detritus, which often lead to excess dissolved organics, nitrate, and phosphate when left unchecked. This makes Seachem Filter Socks an integral addition to any sump and overflow system.
Seachem Filter Socks feature durable, welded seams and have a singed finish, which reduces wear and prevents release of fibers back into the water column.
In addition to a 100 micron rating for exceptional particulate removal, they feature welded seams, which, unlike threaded seams of similar products, will not breakdown over time. They have a singed finish, which reduces wear and prevents release of fibers back into the water column. Finally, the plastic collar simplifies installation and easily fits standard sump fittings.
Dimensions : 10 x 30 cm / 4” x 12” (10 cm / 4” plastic collar)
Directions
Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.
Overview
Dealers asked for it, and Seachem delivered. HydroTote™ is the ideal space saving alternative for shops carrying current 5 gallon hard jugs that simply consume too much space in the home, office, or pet store.
The HydroTote™ is a collapsible jug that holds up to 20 L (5 US gallons) or 10 L (2.5 US gallons). It's perfect for customers that get their saltwater, RO water, or DI water at their local fish store. When not in use, it folds and compresses to take up less space. It pours easily and can withstand a drop of up to 3 meters while full.
20 L HydroTote
Capacity: 20 L (5 US Gallons)
Material: Low-density polyethylene
Length: ~28 cm (11 inches)
Width: ~28 cm (11 inches)
Height (with handle): ~33 cm (13 inches)
Weight (filled): ~18 kg (42 lbs)
Faucet Spout: Yes
Overview
The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.
Compatible with 6 mm (1/4") - Standard Airline Tubing.
Directions
Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing).
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Install check valve, if desired, (not included) inline with tubing outside of the aquarium
Mount your U Tube over the rim of your aquarium in the desired location
It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.