Contain calcium and magnesium sources for rapid growth
Unique shape aids overgrowth of encrusting coral or polyps
Gradation Sheet is an electrostatic film for adding a beautiful finish touch to the back of Nature Aquarium in a natural way. And by combining it with separately sold Light Screen, the stage effect for the background is enhanced. Due to the nature of an electrostatic film, this product can be used repeatedly.
W60×H36(cm)
Glass U Tube joint for silicone tubing
20 mm size suitable for rimless aquariums and most standard aquarium rims
Great for use with CO2 injection systems or bubblers
For aquariums up to 75 L-190 L (20-50 US gallons)
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Built in bubble counter makes the use of a separate bubble counter unnecessary
Simple and easy to use
Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium.
Content
Overview
Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure growth. They are designed for mounting SPS and LPS coral but are just as well suited for soft corals, colonial polyps, and various other sessile invertebrates. They are also designed to mesh together tightly when used in most coral culture systems so that various encrusting and colonial corals, such as zoanthids can spread quickly from plug to plug.
Sizes: 12 Plugs
Directions
Apply a small amount of cyanoacrylate adhesive, such as Reef Glue™, to one Seachem Coral Plug™ and press frag and plug together for 20 seconds. Coral Plugs™ can be individually placed as desired in the aquarium or placed in a network using egg crate.
Overview
The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.
Compatible with 6 mm (1/4") - Standard Airline Tubing.
Directions
Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing).
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Install check valve, if desired, (not included) inline with tubing outside of the aquarium
Mount your U Tube over the rim of your aquarium in the desired location
Overview
The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.
Moss Cotton is a special thread to tie and fix moss on driftwood. In a quite dark green color similar to that of Willow moss and it will naturally biodegrade after Willow moss has taken root to the driftwood or rock.
Superge is a detergent removing the algae stuck on the glass items. Pollen Glass and Lily Pipe become clean in a Superge solution after being soaked for a certain period.