It is used for the connection between CO2 Regulator and Check Valve. This tube is also good for connecting the joint parts. Do NOT connect it directly to the glass products.
For aquariums 75-190 L (20-50 US gallons)
Preferred pollen-style diffuser for large aquaria or high-growth aquaria
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Exceptional particulate removal for superior water quality
WELDED
For aquariums up to 75 L-190 L (20-50 US gallons)
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Built in bubble counter makes the use of a separate bubble counter unnecessary
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria.
Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
Overview
Filter socks are a critical component in maintaining water quality in aquariums. They remove suspended debris and detritus, which often lead to excess dissolved organics, nitrate, and phosphate when left unchecked. This makes Seachem Filter Socks an integral addition to any sump and overflow system.
Seachem Filter Socks feature durable, welded seams and have a singed finish, which reduces wear and prevents release of fibers back into the water column.
In addition to a 100 micron rating for exceptional particulate removal, they feature welded seams, which, unlike threaded seams of similar products, will not breakdown over time. They have a singed finish, which reduces wear and prevents release of fibers back into the water column. Finally, the plastic collar simplifies installation and easily fits standard sump fittings.
Dimensions : 10 x 30 cm / 4” x 12” (10 cm / 4” plastic collar)
Directions
Rinse before use. Fit Seachem Filter Sock into any standard sump or overflow system made for collared filter socks. Remove as necessary for cleaning. Under normal use, cleaning can be accomplished by simply rinsing with a high-pressure hose. For more aggressive cleaning, soak in 1:10 solution of bleach and water for 24 hours and then rinse thoroughly with a high-pressure hose. It can also be cleaned in a standard clothes washing machine; wash on a moderate setting with a cup of bleach added to the wash cycle. Once the normal rinse cycle is complete, Seachem Filter Sock is ready for use.
Overview
The Spiral Bubble Counting Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2 injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2 tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate.
Moss Cotton is a special thread to tie and fix moss on driftwood. In a quite dark green color similar to that of Willow moss and it will naturally biodegrade after Willow moss has taken root to the driftwood or rock.
Gradation Sheet is an electrostatic film for adding a beautiful finish touch to the back of Nature Aquarium in a natural way. And by combining it with separately sold Light Screen, the stage effect for the background is enhanced. Due to the nature of an electrostatic film, this product can be used repeatedly.
Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium.
Read moreLogin to view price
Read moreLogin to view price
