Iodide is a critical element for the health and formation of soft tissue in invertebrates (such as gorgonians, sarcophytons, etc). It has also been shown to be critical for the development of pigments in corals, corallimorpharia, and anemones, both the golden brown of zooxanthellae and the green and red colors of accessory pigments.
Most iodide supplements on the market are simply potassium iodide. When added to an aquarium environment, iodide becomes unstable converting to elemental iodine (which is biocidal) and iodate (which is useless to corals, toxic at elevated levels, and can’t be tested for). Iodide is the only form of iodine available to corals for uptake. Because of this instability, iodide must be stabilized for aquarium use.
vibrance™ is a highly concentrated (10,000 mg/L) naturally stabilized potassium iodide source for reef aquaria that will restore and maintain iodide levels to those found in natural sea water. Our proprietary stabilization process makes vibrance™ the most stable iodide supplement available. It’s also the most concentrated and comes with a pipette for precision dosing. It is formulated to provide a safe source of iodide that will not convert to toxic free iodine under storage or reef conditions.
A highly concentrated (10,000 mg/L) naturally stabilized potassium iodide source
The most stable iodide supplement available
Adjusts pH to 5.8 - 6.8
Helps to replicate the ideal Discus environment
Use with Neutral Regulator® to target a pH
Adjusts pH to 5.0—8.0
Designed for use in planted aquariums
Converts carbonate alkalinity (KH) into available CO2
Contains no phosphate
Creates ideal environment for livebearers and brackish fish
Safe for plants
Effective alternative to the sodium chloride based aquarium salts so prevalent
Removes chlorine, chloramine, and ammonia
Detoxifies nitrite and nitrate
Highly concentrated
Marine and freshwater
Trace elements supplement for Cichlids
Contains only those elements actually demonstrated* to be required by fish
Content
Iodide is a critical element for the health and formation of soft tissue in invertebrates (such as gorgonians, sarcophytons, etc). It has also been shown to be critical for the development of pigments in corals, corallimorpharia, and anemones, both the golden brown of zooxanthellae and the green and red colors of accessory pigments.
Most iodide supplements on the market are simply potassium iodide. When added to an aquarium environment, iodide becomes unstable converting to elemental iodine (which is biocidal) and iodate (which is useless to corals, toxic at elevated levels, and can't be tested for). Iodide is the only form of iodine available to corals for uptake. Because of this instability, iodide must be stabilized for aquarium use.
vibrance™ is a highly concentrated (10,000 mg/L) naturally stabilized potassium iodide source for reef aquaria that will restore and maintain iodide levels to those found in natural sea water. Our proprietary stabilization process makes vibrance™ the most stable iodide supplement available. It's also the most concentrated and comes with a pipette for precision dosing. It is formulated to provide a safe source of iodide that will not convert to toxic free iodine under storage or reef conditions.
Overview
Discus Buffer® helps to replicate the ideal Discus environment (low pH & low GH (General Hardness)). Discus Buffer® will lower pH and keep it lowered. Discus Buffer® also softens water by precipitating calcium and magnesium. Use Discus Trace™ to restore the proper level of trace elements and feed NutriDiet® Discus Flakes for thriving, healthy Discus.
Neutral Regulator® and Discus Buffer® can be used in combination to achieve a desired pH when performing water changes or adding top off water. The ratio chart below is designed for RO water where there is generally no buffering capacity.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to acid pH.
Directions
Use 1 level teaspoon (5 g) for every 40-80 L (10-20 US gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH.For precise dosing use the Seachem Digital Spoon Scale. To raise pH, use Neutral Regulator®. To target a particular pH use in combination with Neutral Regulator® following the chart. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime® to dechlorinate tap water before doing a water change.
To target a particular pH use in combination with Neutral Regulator® following the chart
Neutral Regulator
Discus Buffer
pH
1
1
6.8
1
2
6.4
1
3
6.2
1
4
6.1
1
6
6.0
1
9
5.8
Overview
Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.
Directions
To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale.
In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
1
1.3
6.5
1
2.0
7.0
1
2.5
7.5
1
4.0
8.0
Overview
Seachem’s Brackish Salt™ is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering.
Unlike other aquarium salts currently available to the hobbyist, Brackish Salt™ is more than just a simple sodium chloride product. These other salts can burn leaves and roots in a planted aquarium. However, Brackish Salt™ does not cause this type of damage, and actually provides many nutrients crucial to healthy plant growth. Dosing of Brackish Salt™ allows for specific duplication of different brackish water environments found worldwide (such as the waters of Sumatra or the waters of Borneo). Brackish Salt™ can also be dosed for general brackish water community aquariums and general freshwater community aquarium. Brackish Salt™ is a safe and effective alternative to the sodium chloride based aquarium salts so prevalent
Directions
Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in freshwater before use. Avoid using salt when simply replacing evaporated water.
For live bearers (such as guppies, swordtails, platies, some mollies), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
For estuary fish from the Yucatan or Sri Lanka (Archers, Chromides, some mollies), use 15 g (~2 teaspoons) for each 12 L (3 US gallons).
For estuary fish from Thailand, Cambodia, Borneo, or Sumatra (Datnioides), use 40 g (~2 tablespoons) per 12 L (3 US gallons).
For scats, use up to 80 g (~4 tablespoons) per 12 L (3 US gallons). This dose is not for planted aquaria.
For mixed populations, use an average dose, representative of species present. For specific information on your fish, check with your dealer or other reference source.
For general aquarium salt use (either for mineral replacement or disease control), use 20 g (~1 tablespoon) for each 40 L (10 US gallons).
Overview
Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe™ will not over-activate skimmers.
Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Safe™.
Directions
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
50 gram
Use 200 mg of Safe™ (included scoop) per each 200 L (50 US gallons) as needed to reduce chlorine and chloramine or per 50 L (13 US gallons) for ammonia.
NOTE: These directions supersede all other prior packaging.
All other sizes
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging.
Overview
Cichlid Trace™ supplies a broad range of trace elements demonstrated* to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Cichlid Trace™ contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions
Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet® Cichlid Flakes for optimal fish health.
