fuel™ is a comprehensive carbohydrate, vitamin, amino acid, polyunsaturated fatty acid, and trace element supplement developed to address nutritional requirements commonly associated with corals. fuel™ contains ascorbic acid in a base of chlorella, which contains a rich assortment of amino acids and vitamins. The health benefits of chlorella are widely known and while spirulina, a similar algae, has been regularly used in the industry, aquavitro is the first to utilize the vastly superior chlorella. fuel™ is formulated to provide nutrients available from natural tropical reef waters.
Chlorella is a unique algae that grows in fresh water. It is extremely high in enzymes, vitamins and minerals, including the full vitamin-B Complex. It is over-flowing with unsaturated fatty acids, amino acids, and proteins. There are also vitamins found in Chlorella including: Vitamin C, pro-vitamin A (B-carotene), thiamine (B1), riboflavin (B2), pyridoxine (B6), niacin, pantothenic acid, folic acid, Vitamin B12, biotin, choline, Vitamin K, lipoic acid, and inositol. Minerals in Chlorella include: phosphorus, calcium, zinc, iodine, magnesium, iron, and copper. It contains a higher level of amino acids than spirulina and is FDA approved for use with ornamental fish.
Directions
Shake well before using. Use 5 mL for every 80 L (20 US gallons) twice a week or as required to maintain coral growth.
Comprehensive carbohydrate, vitamin, amino acid, and polyunsaturated fatty acid supplement for corals
Ascorbic acid in a base of chlorella
Makes a trace element supplement unnecessary
Very pure calcium hydroxide
Ideal for increasing calcium in top-off water
Increases pH with no impact on carbonate alkalinity
Restore and maintain GH
Replenishes necessary minerals removed by RO/DI
Necessary to prevent osmotic stress and osmotic shock
Adjusts pH to neutral (pH 7.0) from either a low or high pH
Softens water by precipitating calcium and magnesium
Removes chlorine, chloramine, or ammonia
Adjusts pH to 5.0—8.0
Designed for use in planted aquariums
Converts carbonate alkalinity (KH) into available CO2
Contains no phosphate
Reduces stress when handling or transporting fish
Antiseptic for fish
Promotes healing
Marine and freshwater
Content
Overview
fuel™ is a comprehensive carbohydrate, vitamin, amino acid, polyunsaturated fatty acid, and trace element supplement developed to address nutritional requirements commonly associated with corals. fuel™ contains ascorbic acid in a base of chlorella, which contains a rich assortment of amino acids and vitamins. The health benefits of chlorella are widely known and while spirulina, a similar algae, has been regularly used in the industry, aquavitro is the first to utilize the vastly superior chlorella. fuel™ is formulated to provide nutrients available from natural tropical reef waters.
Chlorella is a unique algae that grows in fresh water. It is extremely high in enzymes, vitamins and minerals, including the full vitamin-B Complex. It is over-flowing with unsaturated fatty acids, amino acids, and proteins. There are also vitamins found in Chlorella including: Vitamin C, pro-vitamin A (B-carotene), thiamine (B1), riboflavin (B2), pyridoxine (B6), niacin, pantothenic acid, folic acid, Vitamin B12, biotin, choline, Vitamin K, lipoic acid, and inositol. Minerals in Chlorella include: phosphorus, calcium, zinc, iodine, magnesium, iron, and copper. It contains a higher level of amino acids than spirulina and is FDA approved for use with ornamental fish.
Directions
Shake well before using. Use 5 mL for every 80 L (20 US gallons) twice a week or as required to maintain coral growth.
Overview
Reef Kalkwasser™ is a pure calcium hydroxide with unsurpassed purity and solubility characteristics. Calcium hydroxide is used to prepare limewater (kalkwasser) solutions that will maintain calcium concentrations at natural seawater levels. Kalkwasser solutions maintain calcium directly and carbonate alkalinity indirectly. However, its capacity to perform these functions is dependent on evaporation rate and CO2 concentration. If these two factors are insufficient you can provide additional calcium with Reef Advantage Calcium™, Reef Complete™, or Reef Calcium™, and carbonate alkalinity with Reef Builder™ or Reef Carbonate™ (do not mix these directly with a kalkwasser solution).
While Reef Kalkwasser™ is a high purity and economical limewater mix, the beginner, or someone with not as much time to devote to their system, may prefer to use other less involved methods for maintaining proper ionic concentration levels.
Directions
Never add this product directly to the tank. Add 3 g (1 teaspoon) to 4 L (1 US gallon) of water and mix to dissolve. If using pure water, a fully saturated solution is prepared by adding 6 g (2 teaspoons) to 4 L (1 US gallon). Drip this solution into tank. Monitor pH and carbonate alkalinity. Adjust rate of addition to maintain a stable pH (8.3–8.4). Notes: Adding 4 L (1 US gallon) of a saturated kalkwasser solution to 150 L (40 US gallons) will raise calcium by 24 mg/L. Always use the clear supernatant (top solution) only and do not allow undissolved material to enter the aquarium. Keep this container tightly closed when not in use and minimize solution/air contact to avoid calcium carbonate formation/precipitation.
Overview
Replenish™ is a proprietary blend of salts designed to replenish physiologically relevant minerals that are removed by reverse osmosis or deionizing filtration. Replenish™ restores General Hardness (GH) using a balanced blend of both “soft” (sodium, potassium) and “hard” (calcium, magnesium) salts. Restoration of mineral content is essential since a complete lack of minerals will result in osmotic stress in those species whose osmoregulation systems are adapted to a mineralized environment. Severe osmotic stress can result in osmotic shock which will lead to rapid death.
To restore GH in the planted aquarium, we recommend Equilibrium™.
Directions
Add 5 mL (1 capful) Replenish™ to 40 L (10 US gallons) to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 20-40 L (5-10 US gallons.)
Overview
Neutral Regulator® adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, and detoxifying ammonia. The use of Neutral Regulator® makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator® with Acid Regulator™ (or Discus Buffer®). To raise pH above 7.0 use with Alkaline Regulator™. All of these products will enhance and stabilize the freshwater aquarium environment. For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements and feed NutriDiet® Tropical Flakes for thriving, healthy freshwater community fish.
Contains phosphate buffers and conditioning agents. Safe for all freshwater fish acclimated to neutral pH.
Directions
Use 5 g (1 level teaspoon) for every 40–80 L (10–20 US gallons) once or twice a month (or as necessary to maintain a pH of 7.0.) Neutral Regulator® may be be initially used daily in cases of high alkalinity until 7.0 is established. It may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water. For precise dosing, use the Seachem Digital Spoon Scale.
Overview
Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.
Directions
To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters. For precise dosing, use the Seachem Digital Spoon Scale.
In order to adjust pH gradually, or if water is soft or not well buffered, use Acid Buffer™ with Alkaline Buffer™. When using Alkaline Buffer™ & Acid Buffer™ together to target a specific pH, utilize the suggested ratio chart.
HINT: First determine the amount of Alkaline Buffer™ needed for the volume of water. This should be determined based upon your desired alkalinity (KH). Then, divide by the number in the middle column to obtain the correct amount of Acid Buffer™ required.
This chart is based on use in RO or RO/DI water and ratios may need to be adjusted for use in tap water.
1
1.3
6.5
1
2.0
7.0
1
2.5
7.5
1
4.0
8.0
Overview
StressGuard™ is the premium slime coat protection product. StressGuard™ will reduce stress and ammonia toxicity whenever handling or transporting fish. StressGuard™ binds to exposed protein in wounds to promote healing of injured fish and to reduce the likelihood of primary and secondary infections. StressGuard™ is compatible with all medications except those that are copper based. StressGuard™ is not amine based and will not interfere with Purigen®; or HyperSorb™ regeneration. StressGuard™ does not coat resins or clog filtration like competing “slime coat” type products can.
What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard™ has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard™.
Directions
Use 1/2–1 capful (2.5–5 mL) to every 40 L (10 US gallons) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.
