This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
This is a new type of glass washing brush with a flexible wire. Even New Lily Pipe is easily cleaned. Small brush that fits curved pipe and flexible coil-like wire are equipped.
Monitors pH solution in aquarium
Easy-to-read color changing indicator solution included
Recommended for planted aquaria with CO2injection systems
An elegant solution for storing food and feeding
For pelleted and flake foods such as Seachem NutriDiet™ flakes
Suitable for all aquarium types
Easy to use fill and use
Ideal for aquarium airline or CO2 tubing
10 mm size is suitable for rimless aquariums
Great for use with CO2 injection systems or bubblers
For aquariums 75-190 L (20-50 US gallons)
Preferred pollen-style diffuser for large aquaria or high-growth aquaria
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Glass U Tube joint for silicone tubing
20 mm size suitable for rimless aquariums and most standard aquarium rims
Great for use with CO2 injection systems or bubblers
Content
Overview
The pH checker is a glass pH monitor that comes with pH sensitive indicator solution. When submerged in water, this indicator solution changes color according to changes in the pH of the aquarium as a result of CO2 gas. The pH checker makes monitoring CO2 concentrations and pH level in planted aquaria easy.
Suction cup included.
Directions
pH Checker works with any size aquarium. Holding the funnel side of pH Checker upward fill the small bulb with 20 drops of indicator solution. Slowly turn the funnel side down avoiding any spillage of the solution. Insert pH Checker into aquarium funnel side down trapping air in the funnel. Attach the pH Checker in aquarium at the furthest point from any diffuser.
The color of the indicator solution will change yellow to green to blue according to the pH of the water. A more yellow color indicates lower pH / more CO2. A more blue color indicates higher pH / less CO2.
Overview
The Glass Feeder is a simple and elegant tool to store, display, and dispense fish food such as Seachem NutriDiets™. This feeder is excellent for every aquarium type and can dispense a wide variety of dry flake and pellet foods. Makes an excellent accessory for aquascapes and reef aquaria where presentation is key!
Directions
Loading
Turn the feeder so that the opening is facing up. Press down on the spring loaded rod; the glass sphere will raise allowing you to pour your food of choice into the Feeder.
Feeding
Simply press down on the spring loaded rod. The glass sphere will lower allowing food to pour out. Experiment with how much much pressure you apply to the rod in order to increase or decrease the amount of food being released.
Overview
The 10 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.
Compatible with 6 mm (1/4") - Standard Airline Tubing.
Directions
Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing).
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Install check valve, if desired, (not included) inline with tubing outside of the aquarium
Mount your U Tube over the rim of your aquarium in the desired location
The 30 mm glass Beetle Diffuser is a pollen style CO2 diffuser that connects to CO2 injection systems to easily disperse CO2 gas into the planted aquarium. The large surface area of the 30 mm disc allows for the diffusion of large volumes of CO2 gas, making the 30 mm Beetle Diffuser an excellent choice for larger aquaria or high-growth aquaria.
Compatible with 6mm (1/4") - Standard Airline Tubing. Suction cups included.
Directions
Rinse glassware with warm water. Attach suction cup and desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing) to the diffuser.
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Mount your diffuser using the suction cup(s). It should be positioned low in the aquarium. When removing or repositioning the diffuser, pull by the suction cup(s) rather than the glass to avoid breakage.
Install check valve (not included) inline with tubing outside of the aquarium
Once securely mounted, turn on CO2. Observe bubble count and adjust CO2 to desired flow rate. Some of Seachem’s diffusers have a bubble counting feature. Otherwise a separate Seachem glass Bubble Counter is available.
Overview
The 20 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2 or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.
Compatible with 6 mm (1/4") - Standard Airline Tubing.
Directions
Rinse glassware with warm water. Trim and attach desired tubing (Compatible with 6 mm (1/4") - Standard Airline Tubing).
To attach tubing to glassware, wet the inside of the tubing with water at the attachment point and carefully slide tubing over glass. The use of other lubricants is not advisable as these usually make the tubing slide off of the glassware too easily. To avoid breakage when removing tubing, do not pull tubing off of glassware. Instead, cut tubing carefully along the attachment length to release the glassware.
Install check valve, if desired, (not included) inline with tubing outside of the aquarium
Mount your U Tube over the rim of your aquarium in the desired location
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium.
Read moreLogin to view price
Read moreLogin to view price
